Flowery Branch Engineering Jobs

On the hunt for engineering jobs in Flowery Branch? Eager to find a position where you can put your engineering expertise to work? Adecco is just the source. Whether you’re a recent graduate, new to Flowery Branch or seeking a challenge, we’re here to maximize your potential.

At Adecco, we have a wealth of jobs in Flowery Branch for professionals like you. And when it comes to engineering jobs in Flowery Branch, they trust the staffing specialists at Adecco to match them with the professionals they're looking for.


We are always hiring for Engineering Jobs in Flowery Branch, GA.

Sign up now to receive the latest jobs that fit your search criteria - direct to your inbox as they become available.


Displaying 8 Engineering Jobs near Flowery Branch

Senior Mechanical Designer

A Senior Mechanical Designer job in Alpharetta, GA is available courtesy of Adecco Engineering and Technical. We are looking for candidates with industrial/power plant experience and knowledge of AutoCAD. You will be responsible for performing project specific tasks based upon customer, project, and engineering needs. You may also be required to work in engineering offices, customer engineering office, or at customer power plant site either during construction or upon completion including after commercial operations commence.

The Sr. Mechanical Designer job responsibilities include:

*Developing plot plan layouts; preliminary and final P&ID diagrams; populating technical spec data sheets for project specific equipment; providing inputs for equipment, engineering service, and construction RFQ’S; checking and validating 3rd party detailed engineering drawings; revising, validating, and issuing as-built drawings.

*System design and component selection associated with Gas Turbine power plant mechanical systems, including fuel, water treatment, inlet conditioning, controls, exhaust, emissions control, water discharge, fire suppression, as well as plant layouts.

QUALIFICATIONS:

*Associate's degree in Mechanical Engineering or equivalent

*At least ten years in Mechanical Design and five years experience using AutoCAD

*Experience using 3D software including AutoCAD, Microstation or SmartPlant a plus

*Detailed knowledge of Codes and Standards applicable to Gas Turbine Power Plant design.

*Must have detailed experience working with the generation of F & IDs, P &IDs, 3-D Layouts, System Design Details Sections Isometrics, Equipment Skid Arrangement Drawings and BOM’s.

*Must be familiar with Power Plant Detailed Design drawing output and be able to review such output for completeness and accuracy, as well as develop same outputs as required.



If you are interested in this Senior Mechanical Designer job opportunity in Alpharetta, GA then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Sarah Singleton at 832-325-3357 or sarah.singleton@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Alpharetta, GA

Calibration Technician

Adecco Engineering and Technical has a current job opportunity for a Calibration Technician on a contract basis with a leading company in Duluth, GA RESPONSIBILITIES:

*Responsible for performance verification, repair, diagnostics and calibration of electronic equipment.

*Performs software, modular and component level upgrades and product modifications using schematics, diagnostic tools and procedures that comply with standard industry practices.

*Maintains accurate records of tests and services performed, enters required information in the company's database.

Job Requirements



*Electronic Calibration and Repair Technician with metrology background is preferred.

*Experience in an Electronic environment is required.

To be considered for this position, please use the "apply now" button to submit your resume.

Duluth, GA

Equipment Engineer



Adecco Engineering and Technical has a current job opportunity for a Equipment Engineer on a contract basis with a leading company in Alpharetta, GA.

Job Description:

*BS in Electrical Engineering with strong project management skills required.

*Experience with DC Plants (rectifiers and batteries) from various vendors is preferred.

*One to two years’ experience in project management required.

*Excellent written and verbal communication skills required.

*Experience with national power and grounding experience preferred.

*Knowledge of equipment integration practices within a telecommunications environment.

*Experience with technical writing and documentation.

*Strong leadership skills required.

*Excellent motivator, problem solving skills, and organizational skills required.

*Excellent time management skills required.

*Must be highly productive and detailed oriented.

To be considered for this position, please use the "apply now" button to submit your resume.

Alpharetta, GA

Test Technician

Adecco Engineering and Technical, a division of the world leader in the recruitment of engineering and information technology professionals, has an immediate Contract opening for Test Technician job opportunity with a leading aerospace company in Alpharetta, GA. You must have testing and debugging experience. Depending on experience level this opportunity will pay up to $23.00 per hour. The Test Technician will be responsible for...

*Conducting ATPs at SRA level (25%)

*Functional Card level tests (10%)

*Testing LRUs to CCA level (10%)

*Installing and monitoring ESS testing (5%)

*Debug to component level (40%)

*Debug failures during ESS conditions (10%)

Required Qualifications:

*Ability to conduct Root Cause Analysis

*Ability to operate and prove proficiency with all all types of GPETE (General Purpose Electronic Test Equipment) DVMs, Oscilloscopes, and Logic Analyzers

*Perform Card and System level testing and System to Card level debugging

*Self -Motivated with minimal supervision

*Ability to mentor and train junior personal

*Minimum 10 years of experience (willing to consider less depending on level of experience)

*Certified Operations Inspector is a plus

If you are interested in this opportunity or other opportunities available through Adecco Engineering and Technical, please apply online or email directly to matt.beamish@adeccona.com.

The Adecco Group is a Fortune Global 500 company and the global leader in HR services. Our group connects over 700,000 associates with our business clients each day through our 6,600 offices in over 70 countries and territories around the world. We offer employment opportunities at any stage in your professional career. Contact us today to discuss available contract and direct hire positions. Adecco Engineering and Technical offers benefits including Holiday, 401(k), Insurance Benefit Plans and Anniversary Bonus opportunities. Adecco Engineering and Technical is an Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Alpharetta, GA

Senior Substation Engineer

Adecco Engineering and Technical has a current job opportunity for a Sr Substation Engineer on a direct basis with a leading company in Atlanta, GA.

Job Description (Must Have/Like to Have):

*Develop and/or revise substation drawings related to the physical and control design of electric power substations from 4kV to 500kV Physical design includes, but not limited to the following:

*Arrangement of substation structures, equipment and their foundations.

*Development of single and three line diagrams.

*Write specifications for materials and equipment to be purchased. Evaluates vendor qualifications and bids; make purchase recommendations for major substation equipment and materials.

*Evaluates contractor qualifications and bids; makes recommendations for contracting the engineering and construction of substation projects

Must Have:

*Required Hands on experience with drawing and design

*Bachelor’s degree in engineering from an accredited college or university

*8-10 years of experience in the electric utility industry

*Professional Engineer license or ability to receive within a year in Georgia

Additional Notes: There is opportunity for advancement to Principal Engineer, Supervisory opportunities as well, with low turnover Ability to work a 9/80 schedule - 9 hour days and off every other Friday Travel will include travel to substations throughout GA (to their 49 participants as needed, less than 25%

To be considered for this position, please use the "apply now" button to submit your resume. If you have questions about the position please contact Matt Beamish at (678) 320-0323 or at matt.beamish@adeccona.com.

Atlanta, GA

Protection & Control Engineer

Our company is hiring for a full time Protection &Control Engineer Job in (Atlanta, Georgia) with a Fortune 100 company for one of the top public power supply companies in the world. You will have an opportunity to work collaboratively with talented professionals who deliver integrated solutions and continue to raise the bar in electrical innovation. Our organization is large enough to be entrepreneurial and growth oriented, and still be large enough to be recognized as a premier provider of Transmission & Distribution relay and control panels, equipment enclosures, and protection & control design services. Here are some of the job responsibilities that the Protection & Control Engineer will provide: New Relay Settings: New settings can range in complexity from a new fused transformer, to a new substation, to generator installations, to capacitor bank protection, to transmission line panels with carrier. Where microprocessor based relays are involved, more time is needed for the many settings involved which dictate the communications and control logic as well as the protection settings themselves. Where new schemes are developed, more time is needed for the development, drafting, checking and testing prior to use. The following is a brief summary of the steps normally involved with a new or modified substation: Prepare or make modifications/corrections to Single Line Metering and Relaying Diagram. Review and make modifications/corrections to Relay Panel and Equipment drawings. Perform impedance, short circuit, and settings calculations utilizingCAPE, MathCAD and/or Excel. Model the system under study and develop settings with proper coordination utilizingCAPEshort circuit software. Prepare relay sheets for field implementation and testing. Prepare microprocessor based setting files for each relay involved and save in a medium suitable for field implementation and future reference. Prepare logic diagrams for insertion into AutoCAD drawings. Check new settings. Test new control panels at relay manufacturer’s site if practical. Provide technical support/make modifications during commissioning. File final field changes to relay sheets in permanent electronic and hard copy file. File previous versions in relay hard copy folders along with transformer nameplate and test data, capacitor technical data, related correspondence, settings calculations, and backup for assumptions made. Requested Relay changes: Many times during the year, a project by GTC or GPC may require changes at a MEAG Transmission S/S. This work may be performed by MEAG test engineers or we will request GPC to do the work. In either case we will check the setting changes for reasonableness and coordinate the changes needed, updating our records as well as passing this on to GPC since they are the system operator. If the work is more extensive and requires a panel replacement, we may do the work in house or send a WAR request to the appropriate party to perform this work. Relay setting changes are also requested for distribution S/Ss by our cities, GPC, and GTC. These changes are evaluated against the transformer protection, and implemented if acceptable. Relay Testing: Relay setting sheets are sent out and received back from GPC and our other contractors on a continuing basis. Each time that a relay is tested, it is recorded on the relay setting sheet and filed. Test values are checked for reasonableness and setting sheets re-issued accordingly. UF Tripping: A spreadsheet of UF relays and their settings is maintained by Operations. Each year these UF Trip locations and settings are re-evaluated for compliance with SERC and NERC requirements. All changes to these locations and settings are made through the relay setting sheet process to show when and by whom these relays were tested or changed. If new projects are needed, Protection & Control has initiated and managed these new projects to completion. Impedance Information Requests: Everyone in the ITS has a need for impedance data that may be owned by another member of the ITS along with the various consultants. Gathering or developing this data can take some time, but is a necessary function in this reciprocal relationship. Review Protective Relay Misoperations: Review morning report to verify proper operation of breakers. Using Comtrade available software, determine the sequence of events and whether relays operated correctly during a misoperation or suspected misoperation. ITS Relay Working Group: This is a standing working group reporting to the JSOP. This work group performs analysis requested by the JSOP and makes recommendations as necessary to the JSOP. ITS FIDVR Working Group: This is a working group reporting to JSOP. The working group is studying the effects of the recovery of the system voltage after a fault. SERC PCS Work Group: This is a standing subcommittee reporting to the EC of SERC. Meeting one or twice a quarter, this subcommittee is responsible for making recommendations to SERC for protection and control requirements necessary for compliance with NERC requirements. This includes relay system testing and maintenance, Disturbance Monitoring Equipment for fault and long term disturbance monitoring, Transmission Misoperations review and analysis, survey responses to NERC, etc. Assignments will be made at each meeting to be completed before the next meeting. MEAG has opted not to participate in actual compliance audits which is another function performed by members of this group. SCADA Standards Development: We have been working with ETS, Construction, and Operations to develop standards for SCADA Point development and resulting standard descriptions for monitoring and responding to alarms. Maintain Impedance Models: Update and maintain impedance models of the Cities and the ITS for fault current studies and setting determinations. This requires calculation of transmission line impedances, distribution line impedances, transformer impedances, etc. as needed for analysis of fault currents and setting parameters. Initiate projects for replacement of overstressed breakers as determined by these studies and other studies performed annually by GPC. Also verify other studies performed by GPC or GTC before expenditures are made by MEAG. Relay Panel Standards: Develop and maintain relay panel standards for the different types of relay panels used. Evaluate new relays for use in different applications. Firmware Upgrades: Install firmware upgrades as need and as recommended by the manufacturer to avoid misoperations or enhance capabilities. Communications: Develop methods of reliable communications from microprocessor relays/devices to SCADA via DNP Protocol or from microprocessor relays/devices back to the office for event recording analysis or status changes, etc. Maintain these paths thru firmware or software upgrades. Technical Support: Provide technical support and recommendations to our cities and other departments as needed. Assist during outages. Provide technical support to Power Production department for Switchyard and equipment construction and operation. Review GSU protection settings. Provide technical assistance as events warrant. Requirements: Degree in Electrical Engineer from an accredited University (preferably Power option.) Minimum five years of experience in System Protection & Control or three years of experience with Masters of Science degree in Electrical Engineering. Compensation: $80,000.00 - $100,000.00 per year If you are interested in this Permanent (Protection & Control Engineer) job opportunity in (Atlanta, GA). For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Katie Clarke at (770) 354-4070 or katie.clarke@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled To be considered for this position, please use the "apply now" button to submit your resume.

Atlanta, GA

Protection & Control Engineer

Our company is hiring for a full time Protection &Control Engineer Job in (Atlanta, Georgia) with a Fortune 100 company for one of the top public power supply companies in the world. You will have an opportunity to work collaboratively with talented professionals who deliver integrated solutions and continue to raise the bar in electrical innovation. Our organization is large enough to be entrepreneurial and growth oriented, and still be large enough to be recognized as a premier provider of Transmission & Distribution relay and control panels, equipment enclosures, and protection & control design services. Here are some of the job responsibilities that the Protection & Control Engineer will provide: New Relay Settings: New settings can range in complexity from a new fused transformer, to a new substation, to generator installations, to capacitor bank protection, to transmission line panels with carrier. Where microprocessor based relays are involved, more time is needed for the many settings involved which dictate the communications and control logic as well as the protection settings themselves. Where new schemes are developed, more time is needed for the development, drafting, checking and testing prior to use. The following is a brief summary of the steps normally involved with a new or modified substation: Prepare or make modifications/corrections to Single Line Metering and Relaying Diagram. Review and make modifications/corrections to Relay Panel and Equipment drawings. Perform impedance, short circuit, and settings calculations utilizingCAPE, MathCAD and/or Excel. Model the system under study and develop settings with proper coordination utilizingCAPEshort circuit software. Prepare relay sheets for field implementation and testing. Prepare microprocessor based setting files for each relay involved and save in a medium suitable for field implementation and future reference. Prepare logic diagrams for insertion into AutoCAD drawings. Check new settings. Test new control panels at relay manufacturer’s site if practical. Provide technical support/make modifications during commissioning. File final field changes to relay sheets in permanent electronic and hard copy file. File previous versions in relay hard copy folders along with transformer nameplate and test data, capacitor technical data, related correspondence, settings calculations, and backup for assumptions made. Requested Relay changes: Many times during the year, a project by GTC or GPC may require changes at a MEAG Transmission S/S. This work may be performed by client test engineers or we will request GPC to do the work. In either case we will check the setting changes for reasonableness and coordinate the changes needed, updating our records as well as passing this on to GPC since they are the system operator. If the work is more extensive and requires a panel replacement, we may do the work in house or send a WAR request to the appropriate party to perform this work. Relay setting changes are also requested for distribution S/Ss by our cities, GPC, and GTC. These changes are evaluated against the transformer protection, and implemented if acceptable. Relay Testing: Relay setting sheets are sent out and received back from GPC and our other contractors on a continuing basis. Each time that a relay is tested, it is recorded on the relay setting sheet and filed. Test values are checked for reasonableness and setting sheets re-issued accordingly. UF Tripping: A spreadsheet of UF relays and their settings is maintained by Operations. Each year these UF Trip locations and settings are re-evaluated for compliance with SERC and NERC requirements. All changes to these locations and settings are made through the relay setting sheet process to show when and by whom these relays were tested or changed. If new projects are needed, Protection & Control has initiated and managed these new projects to completion. Impedance Information Requests: Everyone in the ITS has a need for impedance data that may be owned by another member of the ITS along with the various consultants. Gathering or developing this data can take some time, but is a necessary function in this reciprocal relationship. Review Protective Relay Misoperations: Review morning report to verify proper operation of breakers. Using Comtrade available software, determine the sequence of events and whether relays operated correctly during a misoperation or suspected misoperation. ITS Relay Working Group: This is a standing working group reporting to the JSOP. This work group performs analysis requested by the JSOP and makes recommendations as necessary to the JSOP. ITS FIDVR Working Group: This is a working group reporting to JSOP. The working group is studying the effects of the recovery of the system voltage after a fault. SERC PCS Work Group: This is a standing subcommittee reporting to the EC of SERC. Meeting one or twice a quarter, this subcommittee is responsible for making recommendations to SERC for protection and control requirements necessary for compliance with NERC requirements. This includes relay system testing and maintenance, Disturbance Monitoring Equipment for fault and long term disturbance monitoring, Transmission Misoperations review and analysis, survey responses to NERC, etc. Assignments will be made at each meeting to be completed before the next meeting. MEAG has opted not to participate in actual compliance audits which is another function performed by members of this group. SCADA Standards Development: We have been working with ETS, Construction, and Operations to develop standards for SCADA Point development and resulting standard descriptions for monitoring and responding to alarms. Maintain Impedance Models: Update and maintain impedance models of the Cities and the ITS for fault current studies and setting determinations. This requires calculation of transmission line impedances, distribution line impedances, transformer impedances, etc. as needed for analysis of fault currents and setting parameters. Initiate projects for replacement of overstressed breakers as determined by these studies and other studies performed annually by GPC. Also verify other studies performed by GPC or GTC before expenditures are made by client. Relay Panel Standards: Develop and maintain relay panel standards for the different types of relay panels used. Evaluate new relays for use in different applications. Firmware Upgrades: Install firmware upgrades as need and as recommended by the manufacturer to avoid misoperations or enhance capabilities. Communications: Develop methods of reliable communications from microprocessor relays/devices to SCADA via DNP Protocol or from microprocessor relays/devices back to the office for event recording analysis or status changes, etc. Maintain these paths thru firmware or software upgrades. Technical Support: Provide technical support and recommendations to our cities and other departments as needed. Assist during outages. Provide technical support to Power Production department for Switchyard and equipment construction and operation. Review GSU protection settings. Provide technical assistance as events warrant. Requirements: Degree in Electrical Engineer from an accredited University (preferably Power option.) Minimum five years of experience in System Protection & Control or three years of experience with Masters of Science degree in Electrical Engineering. Compensation: $80,000.00 - $100,000.00 per year If you are interested in this Permanent (Protection & Control Engineer) job opportunity in (Atlanta, GA). For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Katie Clarke at 770-689-4658 or email to katie.clarke@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled To be considered for this position, please use the "apply now" button to submit your resume.

Atlanta, GA

Quality Systems Manager

Adecco Engineering and Technical, a division of the world leader in the recruitment of engineering and information technology professionals, has an immediate opening for a Data Analyst Job with a leading company in Atlanta, GA

Job Summary

Responsible for the administration, maintenance, deployment, improvement and verification of effectiveness, of Pirelli Tire North America Quality Management Systems (QMS).

Essential Duties

1. Meet the Management Plan $ sales, unit sales and profit objectives. 2. Articulate the Vision for growth and prosperity. 3. Manage the ongoing implementation and maintenance of the company Quality Management System (QMS), reporting on the performance of the quality system for review and as the basis for improvement of the quality system. 4. Provide advice and interpretation of the Quality Management System (QMS) to the operational/functional process owners and gain feedback for continual improvement of QMS processes, practices and procedures. 5. Establish local practices and procedures for maintaining high standards of quality and system reliability in compliance with ISO 9001: 2000, TS 16949:2002, OE Customer Specific Requirements, Corporate and Sector’s Central Quality policies, procedures and standards. 6. Manages the internal and external auditing program which includes but not limited to: - Plan and Schedule system, process and supplier audits - Training, evaluating and assigning qualified auditors - Perform systems, process and supplier audits as required - Assure that system, process and supplier audits are performed per schedule and per any internal requirement - Facilitates problem solving steps, root cause analysis, corrective actions and improvement to ensure compliance to the Quality Management System requirements. - Assure that follow up and verification audits are performed and completed as required 7. Maintain Quality Management System documentation: - Assure that revisions are controlled and issued in accordance with QMS Procedures - Assure that nonconformances are tracked, processed and reported - Liaison with all departments to facilitate implementation of QMS changes or improvements 8. Organize, promote, participate and contribute to companywide quality improvement efforts. Work independently and with project team members in the development of quality control deliverables, flowcharts, draft and final release of Quality Management System documentation. 9. To ensure the Quality Management System comply with ISO 9001:2000, TS 16949:2002, OE Customer Specific Requirements and act as liaison with external parties on matters relating to: - The Quality Management System surveillance and registration audits. - OE Customer facility certification and audits. 10. Manage the raw material and compound supplier quality development process by: - Review, investigate, and reach conclusion in resolving non-conforming material issues. - Use analytical and statistical tools to analyze data, make appropriate recommendations or decisions by using appropriate quality tools (SPC, MSA, Control Plans, FMEAs). 11. Represent the companywhen dealingwith all Pirelli stakeholders. 12. Identify and recommend best practices throughout the business and align people, processes, systems and resources to most effectively achieve business goals and objectives. 13. Facilitate teamwork while performing job related activities with other functioning departments and to ensure effective and timely communication. 14. Ensure full compliance with all corporate policies. 15. Maintain a safe working environment and high housekeeping standards. KNOWLEDGE/SKILLS AND EXPERIENCE:

*An associates Degree in Quality Control Technology or Industrial Engineering is required or equivalent combination of education and training. A Bachelor’s Degree in Engineering, Technology or Business is preferred.

*Three (3) years experience in an manufacturing environment

*Three year’s experience in audits of Quality Management System as a trained RABOSA- Certified ISO 9001:2002 Lead Auditor with AIAG ISO/TS 16949: Supplier Auditor Certification is preferred.

*Certified Quality Engineer (CQE)

*Certified Six Sigma Black Belt

Working and applied technical knowledge in the following areas:

*ISO 9000 series international standards, Automotive Certification Scheme for ISO/TS 16949:2002 Rules for achieving IATF recognition, ISO/TS 16949 and OE Customer Specific Requirements and core tools- MSA, SPC, APQP, FMEA, and PPAP.

*ISO 19011 Guidelines for quality and/or environmental management systems auditing

*ISO/IEC 17021:2006 Conformity assessment- Requirements for bodies providing audit and certification of management systems

*ANSI/SO 17025 American National Standard for General requirements for the competence of testing and calibration laboratories

*Demonstrates principals of Quality through effective use of quality tools (histograms, pareto diagram, control charts, cause and effect diagram and etc.

*Analytical thinking and reasoning skills for problem solving and root cause analysis skills

*Process Flow Mapping

*Basics of the MIRS production process and basic tire construction requirements.

*Effective communication skills, both written and spoken together with high awareness of DOT requirements and risk management practices surrounding product compliance.

*Ability to work independently and in a team

*Automotive experience is truly beneficial Location Rome, GA 30161 US (Primary) To be considered for this position, you must use the “apply now” button to submit your resume

The Adecco Group is a Fortune Global 500 company and the global leader in HR services. Our group connects over 700,000 associates with our business clients each day through our 6,600 offices in over 70 countries and territories around the world. We offer employment opportunities at any stage in your professional career. Contact us today to discuss available contract and direct hire positions. Adecco Engineering and Technical offers benefits including Holiday, 401(k), Insurance Benefit Plans and Anniversary Bonus opportunities. Adecco Engineering and Technical is an Equal Opportunity Employer.

Rome, GA

Packaging Engineer Job

Adecco Engineering and Technical has a current job opportunity for an Packaging/Logistics Engineer Job on a contract to hire basis in McCalla, AL.

Job Summary Packaging/Logistics Engineer Job will lead packaging development projects from initiation through manufacture (launch). Projects will consist of modifications of packaging for existing products as well as the packaging for new products. Additional scope includes consideration of new, exploratory platforms for next-generational package design and materials selection. Packaging Engineer will represent the department in cross-functional SBU (Strategic Business Unit) teams. The individual will need to find solutions to problems, manage multiple priorities and expectations, and deliver to those expectations. The individual will have accountability to their Strategic Business Units (SBU areas) for packaging development and support. Project deliverables need to assure that quality and consumer expectations are met while maintaining project schedule. In addition to working within cross-functional teams, the individual will also work closely with quality, finance, procurement, regulatory, engineering, operations, consultants and outside vendors. Responsibilities:

*Package development of various materials.

*Execute projects with complete scope from feasibility through primary. Tertiary package development and qualification.

*Generation and execution of test plans and reports

*Creation and maintenance of time lines and financial targets

*Coordination and completion of qualification programs for new package designs and materials Development and coordination of cost savings initiatives as related to package designs and materials Travel to vendor and manufacturing locations for support of packaging project activities Hands-on evaluation of packaging for conformance to project requirements. These activities can occur in warehouses, manufacturing plants and in packaging laboratory studies

*Determine supply chain coverage and asses market fluctuations

Additional Responsibilities: Review current loop assumptions from program launches Complete fleet counts and asses gaps Asses customer requirements for DOH commitments at supply locations Review access fleet for available containers Process quotes and purchase orders to procure additional packaging Retrofit RFID technology into existing fleet for tracking Qualifications A 4 year technical degree or equivalent experience (6-8 years without technical degree). With degree (1-3) years of experience, preferably within the Supply Chain realm of the automotive industry.

To be considered for this position, please use the "apply now" button to submit your resume.

Birmingham, AL

Service and Repair Technician

Now hiring for Service & Repair Technicians - Temp to hire in Ft. Mill, SC! This exciting opportunity in a high growth environment requires you to use your experience in electronics to test, troubleshoot, evaluate, calibrate and repair handheld devices in support of the achievement of the business objectives including safety, delivery, quality, cost, productivity, inventory & cycle time. If you meet the requirements below, please submit your application and send your resume to jessica.jones@adeccona.com.

Job Responsibilities:

*Disassemble and assemble electronic parts on scanning & mobility equipment at floor stations.

*Test, evaluate and calibrate equipment for defects and repair according to outlined procedures.

*Utilization of hand and power tools to assemble units screw & torque drivers.

*Perform component level soldering onto circuit boards using hand & machine soldering).

*Read wiring schematics.

*Utilize Electrical test equipment (voltmeters, oscilloscopes).

*Utilize customer database concerning issues of product repair.

*Perform diagnostic and test activities, including troubleshooting.

*Work in the Electronics Service & Repair Center where utilization of machinery is common, understanding and complying with Electrostatic discharge safety procedures and guidelines.

*Participate and support in Honeywell Operating Standards expectations, projects, etc. including Lean manufacturing and Six Sigma tools.

*Support achievement of business objectives: safety, delivery, quality, cost, productivity, inventory, and cycle time.

*Support cost reduction, quality, and productivity improvement projects.

*Support goal deployment & execution process (incl. metrics alignment).

*Lift up to 35 pounds.



Basic Qualifications:

*High school diploma or GED.

*Minimum 2 years of experience in electronics or in a related area.


If you are interested in this opportunity please apply online at the link below, and if you have any questions feel free to contact me at jessica.jones@adeccona.com! Please provide a valid email and phone number for immediate response.df-dc

Fort Mill, SC

Process Engineer

Our company is hiring for a full time Process Engineer Job in (Wilmington,NC) with a Fortune 100 company for a large multinational Fiber/Telecom Manufacture. Where you will Supervise and provide direction for the initial equipment set-up, testing, start-up/debug of production processes/equipment and ancillary systems to the point of turnover to operations. Perform (troubleshooting, design changes, improvements, and documentation) of Mechanical, Chemical, and Electrical systems or processes for new or modified production equipment which improve selections, rate utilization, product quality, environmental compliance, and/or raw material and energy usage. Studying, identifying, and implementing process and/or equipment changes, which will reduce total production costs and/or improve product quality, here are the qualification for the position: MAJOR RESPONSIBILITIES: Ongoing Tasks: A. Learning and understanding of processes and equipment, and any modifications to them, for the process areas(s) supported. B. Provide troubleshooting support in assigned areas. C. Develop mechanical, chemical, and electrical start-up/debug checklists and schedules. Oversee, as appropriate, the usage of these systems. D. Interface with all departments, as necessary, to ensure efficient use and operation of equipment. E. Provide guidance to design and installation teams regarding re-design of systems to solve performance issues, equipment interferences, and/or improve robustness.. F. Provide direction to technicians to create and modify existing documentation to complete drawing packages, start-up/debug checklists, illustrations, and machine specs of production equipment. G. Create, review, and update operational documentation as required. H. Development and effective use of project plans and timelines to achieve project goals without sacrificing safety, intellectual property, or quality. Project Tasks: A. Direct initial equipment set-up and debug up to the point of turnover to operations. B. Determining the best solution from a series of alternatives within plant guidelines. C. Recommend actions to correct a manufacturing problem, including making changes to process set points and/or equipment configuration using sound problem solving skills. D. Provide and present necessary information to Project and Operations leadership to gain approval or rejection of recommendations affecting product quality and performance. E. Communicate effectively in various settings with project managers, project support team, production receivers, production schedulers, plant leadership, operations, etc. in many different forms such as: start-up status updates, troubleshooting status/tasks, cost/schedule updates, training classes…. F. Provide third-level troubleshooting support, directing contract engineering techs, and trades as necessary to replace defective components and execute changes in design solve equipment/process issues. G. Training manufacturing and engineering personnel in proper operation and maintenance of processes and/or equipment. H. Complete documentation packages to meet customer requirements. I. Ensure updated documentation exists in each area affected by new or modified equipment/processes.   PERFORMANCE EXPECTATIONS: Technical and project objectives: A. Successful completion of assigned objectives (technical, time, and cost) encompassed by major responsibilities. B. Sound design for processes, experiments, and equipment; (the extent to which such areas delivered meet all of the design and performance criteria required and promised) C. Thoroughness and competence with which engineering problems are treated. D. Thoroughness in carrying assignments to completion. E. Leadership demonstrated through pro-active attention to issues and problems. F. Ability to learn appropriate performance measures and tools that already exist (dashboards, production reports, etc.), and how to use the data to communicate project/production needs. G. Ability to correlate equipment issues through use of data mining tools H. Equipment hands-on proficiency I. The effectiveness of the process by which ideas are implemented - conception through fabrication. Application of the Total Quality Principles: A. Response to technical problems focused on Customer priorities. B. Use of a documented process to arrive at permanent solutions to technical problems. C. Development of measure(s) to track Customers' evaluation of project results. D. Deployment of a response system to Customer feedback to improve effectiveness of subsequent projects. DESIRED SKILLS/EXPERIENCE: Additional Position Requirements: Travel requirements for this position will vary based on current project locations. International travel may be required to support future project needs. (Hours will vary with no guarantee of OT, but 10-25hrs per week is not uncommon and expected at times) Education required: BS Electrical Engineering Technology, BS Electrical Engineering, BS Mechanical Engineering Technology, BS Mechanical Engineering, BS Chemical Engineering Experience required: Minimum 5 to 10 years experience Equipment or software experience preferred: AutoCAD® 2014, Inventor 2014, Windows7, MS Office suite including (Access, Power Point, Excel, Word), PLC and PC based systems, Beckhoff PLC / Motion Control, B-R Control, Automated equipment systems experience Equipment Used: A. Personal Computers B. Fluke Meters, Flow Meters, and other electronic test equipment. C. Hand tools, Precision bubble levels, Digital Inclinometer, Laser level positioning devices D. Electronic calibration equipment E. Precision flow measurement devices F. Programmable Controllers Personnel Directed By This Position: Supervise and provide direction to operators, technicians, engineers, internal maintenance, and outside contract trades as required during the course of equipment debug/start-up/training/turn-over. Desired/Required Soft Skills Skill or work style preferred: A. Technical curiosity B. Strong work ethic, flexible work schedule C. Use of behaviors, which encourage and facilitate Team effort(s) to solve technical problems and challenges. D. Demonstrated ability to secure cooperative and effective performance from coworkers on assigned projects. E. Ability to adjust and adapt to changes quickly (last minute equipment or process changes, scope or schedule changes) F. Ability to work well with varied job requirements and handle multiple priorities. G. Ability to work and communicate well with people is essential. H. Ability to delegate effectively without diminishing results I. Presentation skills highly desirable. J. Well organized. K. Self-starter L. Results oriented Special requirements (Personal Protective Equipment, Certifications, etc) Unique or special requirements: A. Proficiency with Data mining tools B. Strong practical hands-on mechanical aptitude and electrical understanding (All positions require the majority of the time be spent on the floor working with team, process, and equipment) C. Electro-mechanical troubleshooting ability, some experience with electrical schematics D. Familiar with motion control: servo, stepper, DC, AC drives. E. Process variable understanding: flow, temperature, rate, pressure, level. F. Machine control knowledge Compensation: $60,000.00 - $100,000.00per year If you are interested in this (Process Engineer) job opportunity in (Wilmington, NC). For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Stephen Sanya at (919-666-4918) or stephen.sanya@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Wilmington, NC

Equipment operator

Adecco Transportation is currently assisting a local client in their search to fill an Equipment Operator 1 and 2 in the Salisbury, NC. This is a direct hire position opportunity; Class a Position required, experience with street sweepers, bucket trucks, back hoe¿s, and diggers. Class A required Endorsement, Hazmat not required but a plus, clean driving record, drug and alcohol free, previous pump truck experience would be great. The rate of pay will range between $24,000-$42,000 depending on experience.
Great Benefits that will be discussed if qualified for position.
Apply now if you meet the qualifications listed above!

Responsibilities for this Drivers job include:
Knowledge of DOT laws
Logs
Qualifications:
¿2 years driving experience
¿Good driving record
Current medical card

Adecco provides one of the most comprehensive benefits packages in the industry to contract workers.

Click on Apply Now to be considered for this driver¿s job in Salisbury, NC. or you can visit our website www.adeccousa.com to search for other opportunities that are currently available.

Equal Opportunity Employer Minorities/Women/Veterans/Disableddf-dc

Salisbury, NC

Quality Engineer

A Quality Engineer job in Tazewell, Virginia is available courtesy of Adecco Engineering and Technology. This is an on-going contract position with high visibility for an industry leader.

The Quality Engineer job responsibilities include: • Provide technical support for manufacturing quality concerns. • Control of non-conforming material flow throughout the plant. • Assist with product final audit and testing. • Provide customer concern support and corrective actions. • Ensure supplier correction action effectiveness for all incoming material concerns. • Participate in layered audit process. • Monitor and analyze plant waste metrics. • Define preventive measures and detect control methods. • Monitor SPC activity and escalate issues as necessary. • Support new products and engineering changes. • Additional job duties as necessary to facilitate plant operation and needs.

Tazewell, VA

Process Engineer

A Process Engineer job in Winston Salem, NC is available with Adecco Engineering & Technology. This is a long term contract opportunity with the potential of conversion to permanent. The Process Engineer will independently execute projects to fulfill department goals and objectives in the areas of cost reduction, productivity gains, process flow, capacity increases, scrap reduction, and process and product enhancements. Some of the responsibilities of the Process Engineer will include:

*Provide timely and efficient engineering support to meet or exceed the requirements of internal and external customers.

*Support day to day operations

*Develop fundamental understanding of critical process and technical requirements, identify areas of technical risk in assigned projects conduct prototype/feasibility testing to verify concept, and define and document system design specifications.

*Ensure all production and maintenance documentations is completed such as MI's, SOP's, PM's and calibrations.

*Actively participate/direct all phases of the project including design, fabrication, off-line integration and testing, installation, production start-up support, training or plant personnel and technology transfer.

*Recommend and implement long term solutions to recurring equipment performance issues. Provide inputs to capital and facilities plans for equipment upgrade or maintenance cycles.

*Support process projects and data system projects by interfacing with operators and production team leaders to monitor and correct process fluctuations and equipment issues.

*Conduct equipment qualifications and initial training of new personnel

Winston Salem, NC

Director, Project Management

A Director, Project Management position in Winston Salem, NC is available with Adecco Engineering & Technology. This is a Direct Hire position with a competitive salary; excellent benefits package and relocation assistance. Some of the responsibilities of the Director, Project Management will include:

*Leading the Project Management Team (PMT) including managing direct reports

*Representing the PMT in weekly staff meetings

*Determining, with the VP of Operations, the overall direction of the PMT

*The complete project development life cycle on all assigned projects

*Ensuring that all functional leads understand their responsibility and the specific project requirements to ensure client expectations are met.

*Establishing processes, forms, and procedures while assisting in overall company change management

Winston Salem, NC

Senior RF Engineer

A Senior RF Engineer job in Louisville, KY is available courtesy of Adecco Engineering and Technical. To be a successful contributor on this year long project, you must have proven knowledge of CDMA, EVDO, LTE, AWS and microwave to contribute in network design. Strong data analysis skills are required as you select new sites for an ever expanding cellular network while watching key indicators for lost calls, ineffective attempts and switch statistics. The ability to identify RF interference and troubleshoot interference issues with system performance will be crucial in maintaining a reliable network. You will also be tasked with developing new and associate level RF Engineers. Senior RF Engineer job responsibilities include: • Redesign of mature network areas to minimize capacity restraints while ensuring performance fixes and initiatives are in place in an effort to reduce Lost Calls and Ineffective Attempts • Conduct data analysis pertaining to potential sites, site integration and system optimization while also preparing timely FCC/FAA and FAS submissions • Perform radio engineering evaluation for site acquisition and system planning, identifying technical parameters for network growth and location specific needs for new cells while evaluating coverage problems and new service area requirements. • Knowledge of CDMA, EVDO, LTE, AWS and microwave to contribute in network design along with Macro/Micro cell design including antenna selection and placement QUALIFICATIONS: • Technical Degree in related field required • A minimum of five years of RF Design experience is required for this role • Knowledge of CDMA, EVDO, LTE, AWS and microwave as it pertains to network design • Experience conducting, overseeing and relaying outcomes of tests and analysis pertaining to switch statistics, cellular coverage, service areas and other related areas If you are interested in this Senior RF Engineer job in Louisville, KY then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Emily Schweiss at 502-715-4430 or Emily.Schweiss@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Louisville, KY

Mobile Services Technician

An Electronic Technician job in Louisville, KY is available courtesy of Adecco Engineering and Technical on a contract-to-hire basis. To be successful in this role, you will need to have previous experience working with electrical components or have a strong educational background. In this position you will be installing and troubleshooting electrical components in various types of vehicles. This role is ideal for those with experience installing lights, antennas, brackets, sliding shelves, mobile vehicular repeaters, and data modems. Electronic Technician job responsibilities include: - Installing and troubleshooting 2-way radios and radio systems in public safety emergency vehicles, such as ambulances, police cars, and school buses - Installing public safety lights, antennas, brackets to hold lap tops in vehicles and sliding shelf in trunks to hold public safety equipment, mobile vehicular repeaters, data modems QUALIFICATIONS: - Previous experience installing electrical components - Must be able to work in tight spaces within vehicles - Must have a clean driving record, clean criminal check (no felonies) must be able to pass Homeland Security check - CET certification would be a bonus - Experience installing audio or sterio equipment is a strong plus If you are interested in this Electronic Technician job opportunity in Louisville, KY then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact John Perkins at 502-715-4431 or john.perkins@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Louisville, KY

Quality Engineer / Metrology Lab Technician

Adecco is assisting a local client in their search for experienced Metrology Lab technicians on 2nd and 3rd shift in Mebane, NC.

The Metrology Lab Technician is responsible for working in the Metrology Lab. This position requires extreme detail and will involve measuring the internal and external characteristics of parts. Please Apply Now if you meet the below qualifications!

Responsibilities for the Metrology Lab Technician include but are not limited to:

• Apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment (IM&TE) in the electrical, dimensional, optical, physical, mechanical, environmental, and/or chemical disciplines to ensure measurement accuracy.
• Identify and utilize appropriate measurement procedures.
• Perform corrective actions to address identified measurement problems.
• Adapt equipment, standards, and procedures to accomplish unique measurements.
• Maintain calibration standards.
• Perform laboratory and/or departmental housekeeping.

Metrology Lab Technician qualifications are:

• Minimum High School diploma or GED (a copy is required)
• Metallurgical experience, or experience working in a Metrology Lab is REQUIRED
• Demonstrated job longevity - NO job hoppers!!
• Ability to work 7 days/week as required
• Must be able to read, write speak, and understand instructions given in English and have the ability to communicate to others both verbally and by writing effectively

Positions are available on the 2nd shift (3:00pm-11:30pm) and 3rd shift (11:00pm-7:30am). You must be available for any and all overtime. Pay for this position will be determined via interview.

To apply, please complete application online at www.adeccousa.com. If you meet the minimum requirements listed above, a representative will contact you to set up the next steps!df-dc

Mebane, NC

InstrumentationTechnician (PSA Transition)

An Instrumentation Technician (FT or PT) job in Louisville, KY, long term contract opportunity, is available courtesy of Adecco Engineering and Technical. You must have strong experience with Excel working with Macros. In this position, the candidate will write/maintain excel macros to parse raw data files and output test summary. Assemble load and maintain lab computers for instrumentation. Client is a large consumer and industrial company.

Responsibilities for the Instrumentation Technician job:

- Write/maintain excel macros to parse raw data files and output test summary - Assemble load and maintain lab computers for instrumentation - Verify reliability, safety, performance and quality of new test fixtures and equipment - Assistant Engineers in design and setup of test fixtures Qualifications:

- Profficiency in Windows, Excel, and Word - Understanding of National Electric Code - Experience with C+, VEE, Visual Basic or Labview preferred - Experience with instrumentation, PC and network troubleshooting preferred ck on Apply Now to be considered for the Instrumentation Technician job in Louisville, KY. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Stephanie King at 502-715-4428 or stephanie.king@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Louisville, KY

Mechanical Engineer

Responsibilities: · Investigate and countermeasure machining process related quality issues. · Support the production and equipment service teams on all machining process related issues. · Perform root cause analysis of machining equipment failures, implement temporary and permanent countermeasures. · Research long-term machining equipment and process innovation needs. · Support equipment service group on larger and small projects. · Process improvement projects including justification, planning, installation, start-up and line follow-out. · Equipment troubleshooting line side support. · Monitor efficiency & develop / implement countermeasure plans to improve Machining department run rate. Daily Tasks: · Assess and countermeasure previous shift issues. · Work on short and long term process improvement projects. · Answer calls from production in a timely manner. · Monitor equipment running rate and support equipment service to minimize downtime. · Participate in daily equipment service communication meetings. · Support production to achieve daily targets.

Mebane, NC

General Labor

Adecco is looking for qualified individuals to work for a local company that installs and repairs industrial dock doors. This is a temporary opportunity that is primarily project based, but the client is always looking for outstanding candidates. In this role you will go to various sites in the Louisville Metro area and assist technicians as they install or repair dock doors. Apply Now if you meet the qualifications listed below!

Responsibilities for this Generla Labor job include:

•working with hand tools and general knowledge thereof
•Lifting 20-25 pounds regularly
•Stand on your feet all day and working in the outdoor elements.
•Follow direction, meet production metrics, work well in a team environment and maintain a positive attitude.
Qualifications:

•welding, construction, or manufacturing experience
•Great attendence reference
•current and clear driving record
•basic mechanical background

We are currently recruiting for 1st shift 7:30 AM- 3:30 PM and the pay rate is $12.00 and higher. If the candidate is a perfect fit, client will consider direct placement.

Adecco provides one of the most comprehensive benefits packages in the industry to contract workers.

Click on Apply Now to be considered for this Warehouse job in New Albany or you can visit our website www.adeccousa.com to search for other opportunities that are currently available.

Equal Opportunity Employer Minorities/Women/Veterans/Disabled
df-dc

Louisville, KY

Mechanical Project Manager

Mechanical Project Manager

Must have a minimum of 5 years direct work experience in a project management capacity including all aspects of process development and execution including; Mechanical, Plumbing, Process Piping, HVAC, Energy and Start Up and Commissioning.

Duties included:
Contract Document Compliance
Execution of Subcontracts and Purchase Agreements
Maintaining Project Schedule
Submittal Approvals
Expediting Material and Equipment Deliveries
Responsibility for Performance of Subcontractors Work
Preparation and Negotiation of Extra Work Orders
Labor and Material Cost Control
Estimating
Commissioning, Project Turn Over

Requirements:
Proven experience in strategic planning and risk management
Ability to read and understand mechanical and electrical drawings, specifications, purchase orders, contracts, etc.
Knowledge of estimating techniques, cost control, and pricing
Ability to react to project adjustments and alterations promptly and efficiently -
Effectively prioritize and execute tasks in a high pressure environment
Ability to interact with peers, customers, and management
Foster and maintain a positive team environment
Knowledge of AUTOCAD, Microsoft Excel and Word
Ability to bring projects to successful completion within budget
Excellent written and oral communication skills

Relocation package available.df-dc

Jacksonville, FL

PROJECT ENGINEER

A Project Engineer job in Louisville, KY is available courtesy of Adecco Engineering and Technical. To be successful in this role, you must have strong organizational skills combined with the ability to use resources available to you to quickly resolve issues as they arise. You will be responsible for developing engineering specifications and cost estimates of both customer and original design concepts. You will manage customer schedules, tooling, quality assurance, documentation and press schedules, ensuring the project is to the customer's satisfaction. In this role, you will have the opportunity to grow into a Program Manager role. Project Engineer job responsibilities include: • Work with the Program Manager to ensure proper feasibility and develop project objectives • Determine project responsibilities by identifying key elements and assigning to appropriate personnel • Develop and maintain project schedules, calculate time requirements and sequence project elements, resolving issues as they arise to alleviate interruptions • Determine project specifications using product design, customer requirements and performance standards as your guide QUALIFICATIONS: • Bachelor's degree in Mechanical or Electrical Engineering or related field • Two or more years of Project Engineering experience, preferably in the Automotive industry with exposure to PPAP management • Strong organization and project management skills combined with effective communication skills required. • Advanced skills in Microsoft Office (Word, Excel, Power Point, Outlook and Project) If you are interested in this Project Engineer job in Louisville, KY then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Emily Schweiss at 502-715-4430 or Emily.Schweiss@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

New Albany, IN

ELECTRICAL ENGINEER TECHNICIAN

Adecco Engineering and Technical has a current job opportunity for an Engineer Technician in Salem, VA. This position will provide support to the excitation engineers for a premier company in Salem, VA. Daily responsibilities would include creating/modifying Bill of Material, support of drawing submittals, and drawing creation and revision updated using AutoCad. This person would also coordinate and verify compliance work flows to technical regulations and standards. Below please find an overview of requirements for this opportunity.

JOB REQUIREMENTS: Bachelor Degree in Electrical Engineering or Engineering Technology Expert level proficiency on all Microsoft Office tools Expert level poficiency on AutoCad Preferred experience with SAP and ENOVIA Software

To be considered for this position, please use the "apply now" button to submit your resume. If you have questions about the position please contact Sara Gracey at (910) 819-4942 or at sara.gracey@adeccona.com.

Salem, VA

QA Lab Supervisor

A QA Lab Supervisor job in New Albany, IN, direct hire opportunity, is available courtesy of Adecco Engineering and Technical. You must have experience in supervising Lab Techs, Programmers, CMM Operator, and Layout personnel. The client specializes in injection mold and precision tool making.

Responsibilities for the QA Lab Supervisor job:

- Responsible for “directing traffic” as pertaining to incoming samples, layout schedules and delivery dates. - Responsible to maintain required project delivery dates for inspection of all molded plastic parts, CMM & Check Fixture qualifications. Qualifications: - Experience supervising Lab Techs, Programmers, CMM Operator and Layout personnel - Experience in: Injection molding, Fabrication, Paint, Electronics, Assembly, and ISO 9000 or equivalent Quality Management System. Shift: 1st Shift Click on Apply Now to be considered for the QA Lab Supervisor job in New Albany, IN. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Stephanie King at 502-715-4428 or stephanie.king@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

New Albany, IN

PROCESS TECHNICIAN

A Process Technician job in Louisville, KY is available courtesy of Adecco Engineering and Technical. To be successful in this role you must have experience problem solving and troubleshooting injection molding equipment with a strong mechanical ability to be involved in tool repair. Successful candidates will have experience setting up and operating injection-molding machines, assists with mold changes, color changes and material changes as needed. Our client is seeking a strong team player with effective communication skills to help them continue company growth.

Process Technician Job Responsibilities:

*Responsible for cost reduction by ensuring the injection molding machine is producing quality mold parts.

*Knowledge in process troubleshooting.

*Basic understanding of Injection Molding machine Robotics and automation.

*Able to make suggestions on improving the process and continuously reviews and improves procedures and processes.

*Working knowledge of mold design, operation and maintenance practices.

Qualifications:

*High school or equivalent work experience

*One or two years of Process Technician experience

*Qualified candidates will successfully troubleshoot production process, maintain and adjust mold press

*Familiar with adjusting mold presses

If you are interested in this Process Technician Job in Louisville, KY then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Allen Hornback at 502-715-4440 or allen.hornback@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

New Albany, IN

Journeyman Mold Maker

A Mold Maker job in New Albany IN is available courtesy of Adecco Engineering and Technical on a direct-hire basis. In this position you will assist in the build and/or repair of all types, sizes and shapes of plastic injection casts. You will further set up, runs off, and tests casts to produce a product meeting specifications, tracing die difficulties to their source and making any necessary modifications. Mold Maker job responsibilities include: - Assist in the build and/or repair of all types, sizes and shapes of plastic injection casts - Assemble and test complex tools and casts in production - Reads and interprets blueprints or works from verbal or written instructions, sketches, or from the actual part to be copied or fitted - Plans the setup and operation of various tool shop tools, considering types of material, tolerances, and machine tool feeds and speeds - Heat treats and welds parts as required. Uses precision measuring and gauging tools, performing required inspections before, during, and after machining - Uses hand tools of the trade for modifications as required - Fits and assembles cast parts, tools, and dies - Sets up, runs off, and tests casts to produce a product meeting specifications, tracing die difficulties to their source and making any necessary modifications QUALIFICATIONS: - Journeymen’s License preferred - Five to seven years of relevant experience - Experience in plastic injection casting strongly preferred If you are interested in this Journeyman Mold Maker job opportunity in New Albany IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact John Perkins at 502-715-4431 or john.perkins@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

New Albany, IN

CNC Machinist

A CNC Machinist job in New Albany, IN, direct hire opportunity, is available courtesy of Adecco Engineering and Technical. You must have experience in CNC lathe as well as CNC VMC (Vertical Machining Centers).

Responsibilities for the CNC Machinist job:

- Program and operate both CNC Lathe and CNC VMC disciplines - simultaneously as needed. - Experience in: Injection molding, Fabrication, Paint, Electronics, Assembly, and ISO 9000 or equivalent Quality Management System. Shift: Day Shift Click on Apply Now to be considered for the CNC Machinist job in New Albany, IN. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Stephanie King at 502-715-4428 or stephanie.king@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

New Albany, IN

CMM Programmer/Operator

A CMM Programmer/Operator job in New Albany, IN, direct hire opportunity, is available courtesy of Adecco Engineering and Technical. You must have experience in programming CMM. In this position you improve product quality through the identification and elimination of root cause of issues.

Responsibilities for the CMM Programmer/Operator job:

- Provide technical support to drive the development, procurement, and implementation of factory quality measurement systems including gauging, test equipment, and go/no-go decisions. - Support work station documentation process; create and update work instructions, visual aids, and alerts. - Respond to abnormalities in finished product testing and work to resolve those issues. Qualifications: - Engineering / Technical degree or equivalent experience. - PC-DMIS experience - Experience in: Injection molding, Fabrication, Paint, Electronics, Assembly, and ISO 9000 or equivalent Quality Management System. Shift: 2nd Shift Click on Apply Now to be considered for the CMM Programmer/Operator job in New Albany, IN. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Stephanie King at 502-715-4428 or stephanie.king@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

New Albany, IN

NPD Engineer

NPD Engineer needed for Jacksonville, FL! Job Description: Perform Engineering duties primarily in a New Product Development environment, with direct involvement in the development and introduction of new products. This role will focus on generation of proper manufacturing process instructions for assembly, inspection, and test of various components. As well as development of tooling for assembly and test of same. The role may also support design reviews, product transitions, and root cause/corrective action investigations. 6 month contract Pay Rate - $22.53/hr Only local candidates will be considered as no relocation or per diem is available. Candidates must be able to successfully pass a background check and drug screen. Salary based on experience. Candidates must apply through the "Apply Now" function for consideration, or create a profile at www.AdeccoUSA.com then attach a MS Word resume to this posting. Qualified candidates will be contacted for interview. NO PHONE CALLS, PLEASE. If you are interested in industry specific articles and news about Engineering & Technical please visit our Facebook page at http://www.facebook.com/pages/Adecco-Engineering-Technical/13825422252?ref=mf , and become our Fan. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Jacksonville, FL

Industrial Certification Engineer

Industrial Certification Engineer needed for Jacksonville, FL! Job Description: • Strong technical aptitude, including applicable engineering tools and systems • Solid oral and written communication skills • Strong interpersonal and leadership skills • PC proficiency Qualifications/Requirements: Bachelor of Science in Engineering with at least 3 additional years of engineering experience in hazardous area industrial certification, ATmospheres EXplosibles (ATEX), Conformity(CE), Standards (UL), Canadian Certification Process (CSA), Edison Testing Laboratories (ETL). 4 month contract Pay Rate - $26.82/hr Only local candidates will be considered as no relocation or per diem is available. Candidates must be able to successfully pass a background check and drug screen. Salary based on experience. Candidates must apply through the "Apply Now" function for consideration, or create a profile at www.AdeccoUSA.com then attach a MS Word resume to this posting. Qualified candidates will be contacted for interview. NO PHONE CALLS, PLEASE. If you are interested in industry specific articles and news about Engineering & Technical please visit our Facebook page at http://www.facebook.com/pages/Adecco-Engineering-Technical/13825422252?ref=mf , and become our Fan. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Jacksonville, FL

Quality Engineer

A Quality Engineer job in Madison,IN is available courtesy of Adecco Engineering and Technology. You will need to have practical knowledge of the use of quality tools, such as 6 Sigma, 8D, 5S, Kaizen, APQP, PPAP, quality system audits, GD&T, and Project Management. You will also serves as liaison between our Client and its customers and suppliers. . The Salary for this position will be between $65,000 to $85,000 per year. Quality Engineer job responsibilities include: • Works with Teams in establishing quality plans and problem solving. • Conducts/participates in internal audits • Focus on the Continual Improvement of assigned product lines, processes and customers. • Uses statistics and other data analysis techniques to monitor and improve products and processes QUALIFICATIONS: • Bachelor’s degree from an accredited college. • Three years of experience in similar job • Quality certifications are a plus • Excellent communication skills, both oral and written If you are interested in this Quality Engineer job in Madison,IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Roderick Grays at 317-558-8866 or rod.grays@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Madison, IN

Composite System Engineer

Adecco Engineering and Technical has a current job opportunity for Nuclear Engineer. The successful candidate will Review EPU Task Reports and updated customer inputs to determine plant licensing document revisions needed for updating those document(s) to current format and content requirements.

JOB REQUIREMENTS: Nuclear or Mechanical Engineer - Bachelor Degree Knowledge of design and function of BWR systems such as ECCS, standby gas, nuclear boiler, and/or with BWR startup testing Minimum of 5 years related experience Final Task Reports to be reviewed address design and operation of various reactor systems under Extended Power Uprate conditions. The review will ensure that conclusions reached in those FTRs remain applicable to the subject plants and ensure that proper input to the plant licensing document is provided. Some reports will be simple reviews to justify a determination that no additional analysis or plant licensing document input is needed, while some reviews might lead to additional analysis, a revised FTR, and new plant licensing document input.

To be considered for this position, please use the "apply now" button to submit your resume. If you have questions about the position please contact Sara Gracey at (910) 819-4942 or at sara.gracey@adeccona.com.

Wilmington, NC

CONTROLS ENGINEER

Our company is hiring for a full time Controls Engineer job in (Wilmington, NC) for our manufacturing department. Where you will assist team of engineers to provide production support and troubleshooting for 24/7 manufacturing operation. The Controls Engineer will aslo colaborate with production associates, technicians, and engineers to ensure reliable equipment operation via automated control systems and user interfaces. You must have a minimum of 3-5 years' experience in designing automated controls in a manufacturing environment. The salary for this position is based off experience but the salary will range from $75,000.00 - $120,000.00 here is some bullet points about the job:

Controls Engineer Technician Job Description: - Ability to assist the engineering group in designing and deploying controls solutions in a manufacturing facility. - Daily responsibilities to include the following: - Production support for any throughput or safety items that may be hindering output. - Resolution to ongoing chronic issues that require process monitoring and data analysis to implement robust controls solutions. - Troubleshooting production equipment utilizing PLC’s and other typical troubleshooting methods (i.e. voltmeter, oscilloscopes, etc.) - Assist in designing electrical prints for controls systems. - Working across multiple plant organizations to ensure proper deployment and installation of controls solutions. - Document and update procedures and drawings to reflect current equipment status. - A 2 year degree in electrical/electronics’ technology desired (or equivalent experience). - Candidate must have proven experience with any of the following PLC’s: Allen Bradley, Modicon, GE Fanuc, Siemens, Omron (Or comparable platform). - Knowledge of Beckhoff PLC platforms is a plus. - Ability to eventually enter into an off-hours support rotation.

Projects involved with: · Software changes for process efficiency improvements and process controls changes .Perform professional level assignments of wide scope and high complexity involving coordination of developing and implementation. Functional Responsibilities:

*Assist team of engineers to provide production support and troubleshooting for 24/7 manufacturing operation. Work with production associates, technicians, and engineers to ensure reliable equipment operation via automated control systems and user interfaces.

*Support process and product optimization/improvement efforts. Develop plans for innovative solutions to technical problems and follow through to implementation.

*Provide training for engineers and/or production associates as needed for new processes, equipment, or control systems.

*Participate in capital projects.

*Some after hour, on-call support may be needed.

Required Sills/Experience:

*Technical background in an Engineering or Computer Science Discipline

*Strong computer programming skills: VB, C, Realtime systems

*Ability/experience integrating computers into manufacturing processes to increase efficiencies and lower cost.

*Ability/experience troubleshooting simple low voltage electrical circuitry

Desired Skills/Experience:

*Candidate must be accomplished in managing of several web development projects with partner agencies.

*Understanding of web technology

*Strong written and verbal skills, but not necessarily a copy writer or editor.

Skills: MES | MS Windows, Access | VxWorks, VB, C, Realtime System | iFIX | RTP I/O | VB.net, EthernetIP I/PO | Motion Systems, Controls Design Soft Skills:

*Able to communicate equally well with engineers, production associates, and managers

*Able to work in a team-oriented environment

*Self motivated, Independent, High Initiative

Education: Requires Bachelor's/Masters degree in Electrical Engineering, Computer Science or Computer Engineering with equivalent experience. If you are interested in this Controls Engineer job opportunity in (Wilmington, NC). For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact (Stephen Sanya) at (919-666-4918) or (stephen.sanya@adeccona.com). Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Wilmington, NC

Packaging Engineer

A Packaging Engineer job in Seymour, IN is available courtesy of Adecco Engineering and Technology. You must be able to procure and develop packaging for new and existing products. You must have the ability to introduce lean manufacturing concepts and prepare assembly lines to support those concepts. You will be working cross functionally with other teams to develop efficient packaging. The salary for this permanent position begins at $55,000. Packaging Engineer job responsibilities include: • Ensuring project deadlines are met • Interfacing with Product Development, Marketing, Quality, and outside vendors • Developing a system for returnable packaging that will ensure a lean functional system • Knowing and understanding of automotive regulations QUALIFICATIONS: • Bachelor of Science in:

*Packaging Engineering

*Mechanical Engineering

• At least two years of packaging engineering experience • Automotive manufacturing experience is a preferred • A combination of internships and experience may be considered If you are interested in this Packaging Engineer job in Seymour, IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Joshua A. Hughes at 317.558.1044 or Joshua.Hughes@AdeccoNA.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Seymour, IN

Quality Manager

A Quality Manager job in Cincinnati, OH is available through Adecco Engineering and Technical. You must have experience as a Quality Team leader or manager to be considered for this role. As the Quality Manager, you will be responsible for the successful implementation and ongoing success of an ISO based Quality System in the organization. You will facilitate, direct and coordinate all activities pursuant to quality theory and practice. The Quality Manager job responsibilities include:

-Maintain all certifications for special processes (Welding,{Laser & GTAW], FPI, X-Ray, EDM, Laser, MCL) -Coordinate all quality and product audits, internal, certification and customer based. -Ensure compliance with local, state, and federal safety legislation as Safety Director. -Develop and administer employee health and safety orientation programs. -Supervise quality engineering and document control.

Qualifications:

-Five plus years experience as a Quality Team Leader or Manager -Knowledge of ISO 9001 and AS 9100 Quality Management Systems -Knowledge of Nadcap special processes qualification/certification approach -Knowledge of statistical process control techniques and use of MiniTab -Demonstrated application of sound quality control approach in a batch scheduled manufacturing environment

If you are interested in this Quality Manager job in Cincinnati, OH then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Catherine Wylie at Catherine.Wylie@adeccna.com.

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Mason, OH

CONTROLS ENGINEER



A direct hire Controls Engineer job in Mason, Ohio is available courtesy of Adecco Engineering and Technical. You must have an understanding of various controls systems and aerospace industry experience. Job duties include the design and implementation of electrical control schematics and the management and assistance of system start up. The salary for this position is 75k for experienced candidates. Process Controls Engineer job responsibilities include: • Design and implement electrical control schematics • Manage and assist in system start up • Test, maintain and modify existing systems • Provide advice and consultancy support QUALIFICATIONS: • Bachelor degree in an Engineering discipline • Five years of experience • Understanding of various types of control systems • Experience with Allen Bradley PLC’s, ControlLogix, SLC and PLC5 family controllers If you are interested in this direct hire Process Controls Engineer job in Mason, Ohio then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Louis Gideon at 513-824-8287 or louis.gideon@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Mason, OH

Manufacturing Engineer 2

A Manufacturing Engineer job in Cincinnati, OH is available courtesy of Adecco Engineering and Technical. In this role, you will be responsible for analyzing engineering design documents and/or prototypes and make plans/decisions concerning required methods. You may also make recommendations concerning personnel, time and cost requirements. You will need to be an excellent team player though comfortable working independently at times. The Manufacturing Engineer job responsibilities include: -Consistently meet cost, schedule, quality and customer specification requirements on manufacturing projects. -Devise and implement continuous improvement ideas on all ongoing jobs. -Design tooling if required and design all fixtures needed where design can be completed in three hours or less. -Complete quotes on projects that may require any or all of the processing discipline. Qualifications: -Bachelor’s degree in a Engineering discipline. -5 plus years of Manufacturing Engineer experience. -Machine shop experience preferred. -Firm understanding of CNC programming is a plus. If you are interested in this Manufacturing Engineer job in Cincinnati, OH then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled.

Mason, OH

Tooling Engineer - Plastics Injection Molding

Adecco is assisting a local leading client in Columbus, IN in recruiting for a Tooling Engineer. Please review the Tooling Engineer job description below and apply now!

Job Descriptions for Tooling Engineer job:

Responsibilities:

-Support product development, work with USA and China engineering teams to insure that products are well designed and meeting all safety, functional and manufacturing standards and requirements in a production environment
-Initiate RFQ forms that to insure all required information is complete and accurate.
-Review tool quotes and/or conduct tooling cost analysis, review and approve tool plan and tool design drawings from mold shops.
-Manage tool shops that to insure tools are built per set budget, timeliness and specifications.
-Responsible for tool shops audit and compiling tool shop qualification report.
-Monitor tool development schedule and provide regular progress update to product development teams.
-Provide onsite tooling supports, samples review and tools buyoff to both domestic and overseas tooling suppliers if needed.
-Review trial run samples, conduct sample review reports and provide improvement solutions during tooling debug phase.
-Responsible for tool qualification approval per Dorel RTP and PPAP procedures.
-Provide tooling supports for initial production run and continuous production improvements.

Qualifications & Experiences:

-Bachelors degree or above in mechanical engineering or related fields.
-Minimum 5 years working experience in plastic tool development and/or tool design.
-Solid experience in plastic injection molding and resins applications. Ability to solve injection molding problems and/or improve efficiency of injection molding cycle time.
-Familiar with plastic tool fabrication processes, various tool steels and parts standards.
-Experience in managing tool shops or experience to develop tools with multiple suppliers.
-Sound knowledge of mechanical (plastic parts) design and/or experience in developing new products is preferred.
-Good understanding of tooling cost structure and/or experience in managing tool quotes.
-Strong analytical and problem solving skills, ability to drive projects and provide instructions/improvement recommendations to tool makers for solving problems.
-Familiar with 3D CAD software, such as Pro-E and SolidWorks, experience in mold flow analysis will be plus.df-dc

Columbus, IN

Quality Engineer

Adecco is hiring a Quality Engineer for a local leading client in Columbus, IN!

The Quality Engineer represents the Quality Assurance function on product development core teams from early design stages to product implementation in manufacturing. This individual develops and executes the Quality plan for each product development stage. They ensure that product development projects are conducted in compliance with internal, customer, and regulatory requirements. Apply Now if you meet the qualifications below!

Responsibilities include:

• Review new and modified product designs and process documentation for quality attributes, including manufacturability, serviceability,testability, reliability, and conformance to product and quality system requirements.
• The creation and delivery of QAE deliverables within NPD such as but not limited to: QR, QFD, DVP&R, QTM, statistical data analysis, testing and tracking of Validation of Products, initial and ongoing DVP&R, component quality validation and re-validation.
• Manage continued compliance, engineering changes, consumer complaints, retailer returns, and changing regulatory requirements.

Qualifications include:

- BS Degree in Engineering required with 5+ years of relevant experience
- ASQ Certified Quality Engineer (CQE) highly preferreddf-dc

Columbus, IN

Design Engineer

A Catia Design Engineer job in Columbus, IN is available courtesy of Adecco Engineering and Technology. You will be responsible for effectively designing, developing, and coordinating the application of current and new components. You would be responsible for mechanical and electrical design using Catia. Additionally you would be conducting tests to improve the reliability of the components. Catia Design Engineer job responsibilities include: * Requires strong analytical skill sets, ability to analyze stress/strain of steel assemblies (weldments and fasteners), and strong engineering aptitude. * Use CAD as an engineering tool in the layout and modeling of option products. * Maintain drawings and engineering change instructions, as well as specification changes. * Provide support to all mechanically or electrically-related areas including the collection of marketing data for special option forklift parts and other duties as assigned. Qualifications: * Requires BA in Mechanical or Electrical Engineering * Prefer at least three years of experience supporting New Product Development with strong understanding and ability to perform FEA. * 3 years of Catia experience required * Possess the technical ability to read, evaluate, understand and communicate data from prints and technical documents. If you are interested in this Catia Design Engineer job in Columbus, IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please Faith A. Hoskins at (317) 842-2870 or faith.hoskins@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Columbus, IN

Technical Specialist –Electrical Engineer

An Electrical Engineer Job in Greensburg,IN is available courtesy of Adecco Engineering and Technical. You will need to create specifications, budgets, and installation plans (including schedules, target setting, and task definition) for new or modified equipment. Your responsibilities would include interacting daily with production and maintenance associates related to processes, implementing production improvement activities and Provide technical support, line management, and associate training and development. The salary for this position in between $55,000 and $60,000 annually. Electrical Engineering Technical Specialist job responsibilities include:

*Familiar with manufacturing systems and processes

*Basic understanding of manufacturing environment in regards to safety, quality, delivery, and cost.

*Strong mix of hands-on and technical skills.

*Proficient using Microsoft Office (Excel, Powerpoint, Word).

*Strong communication skills (presentation, written, oral, listening).

*Ability to work effectively in teams.

*Strong project planning, prioritizing, and organizing skills.

*Self motivated and takes initiative.

*Working knowledge of PLC’s and HMI’s.

*Knowledge of NEC, NFPA, RIA and industry electrical standards.

*Strong understanding of Electrical Engineering theory and able to apply it during the planning and implementation of equipment: Power Distribution/Load Calculations, Safety Circuit Modifications/Integration, Harmonics/Electrical Noise Reduction/Prevention, Proper component sizing based on design application, Network Topologies implementation and integration, Proper wire sizing based on environment, length, and load.

QUALIFICATIONS:

*2+ years experience with manufacturing systems/processes.

*Co-op/internship experience in fact paced manufacturing environment

*Bachelors degree in Electrical Engineering/Engineering Technology or equivalent experience

If you are interested in this Electrical Engineering Technical Specialist job opportunity in Greensburg,IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Faith Hoskins at (317) 842-2870 or faith.hoskins@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled .

Greensburg, IN

Electrical Designer

A Design Specialist job in Dayton, OH is available through Adecco Engineering and Technical. To be considered for this role you must have in depth experience using AutoCad software. You will be assisting the project engineers and application engineers in the design and development of new and/or modified robotic system drawings/documentation. In addition, you will be preparing and analyzing concepts, sketches and complete detail and layout drawings on a variety of complex automated systems. Design Specialist job responsibilities include: -Determining customer needs from specifications and documentations from design requirements -Evaluating component sizes, weights, tolerances and characteristics to meet customers expectations. -Assisting in the analysis of test results and suggestions from engineering meetings and implementing the changes required. Qualifications: -Experience in a fast paced automation field, specifically in electrical design. -Three to five years of experience using AutoCad. -Ability to create electrical designs from blank paper. -Ability to specify components to be used in designs. If you are interested in this Design Specialist job in Dayton, OH then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Louis Gideon at Louis.Gideon@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled -

West Carrollton, OH

ELECTRICIAN

Adecco is currently seeking an Electrician to work at various locations in the Mid-Ohio Valley. Associates placed on this assignment will be working on new construction: bending conduit, wiring switch receptacles and basic wiring. Prior commercial experience a plus. The pay $14.00 to 18.00 based on experience. Position will start as soon as possible and is open-ended. This is possibly a temporary to permanent position for the right candidate!

For more information, please apply online at www.AdeccoUSA.com or call (304) 422-0288.df-dc

Marietta, OH

Electronic Repair Technician

First and second shift Electronic Repair Technician jobs in southeastern Columbus, Ohio or Groveport, Ohio. You will need to have strong soldering experience with various electronics and a firm understanding of electronics. You will be providing technical support for tasks such as repairing components by troubleshooting, surface mount soldering and repairing down to the component level for our client’s communication company. These are entry level long term contract positions and pay rate will be competitive per hour wage. The company will look to advance individuals by title and/or financially based on excellent performance. Responsibilities for the Electronic Repair Technician Jobs Include

*Test, troubleshoot, and repair complex equipment to the component level

*Replacing parts on the circuit boards

*Providing customer service

*Surface mount iron soldering

*Assemble and dissemble electronic equipment

Qualifications:

*Two year Associate degree in Electronics, military experience or related experience is required

*Ability to work in a fast paced environment and able to meet quotas

*Ability to read and comprehend schematics

*Able to use an oscilloscope, a spectrum analyzer and a soldering iron

*Must have strong surface mount soldering skills

*Must be a team player, motivated and eager to learn and grow.

*Must be detail oriented

*Must proficient on computers

*Able to lift up to 30 lbs.

*If you have BGA experience that is also desired

*Must be able to pass a drug screen and criminal background check

To be considered for these Electronic Repair Technician jobs in Columbus, Ohio, please use the "apply now" button or email a resume in a Word document to Lindsay Verhoff at lindsay.verhoff@adeccona.com. Please consider sending a cover letter to further highlight your experiences.

Groveport, OH

New Model Project Engineer



Adecco Engineering and Technical has a direct hire opening for a New Model Engineer job in the Columbus, Ohio area. We are seeking qualified candidates for the position of New Model Engineer who will be responsible for coordinating new model activities with customer requirements. The person will be responsible for pproviding direct interface with customers on New Model development activities. Automotive/Manufacturing experience required.

Responsibilities for New Model Engineer job include:

*Facilitate overall company project plans

*Work with Stamping Tooling Engineering and Weld Engineering Groups to assign responsibility and due dates for project activities

*Manage prototype activities (oversee fabrication of prototype assemblies)

*Facilitate development of part quality requirements at prototype stage in the New Model Development process

*Coordinate and document trial part build activities; includes all inter-department and supplier coordination necessary to build trial parts for on-time delivery to customer

*Facilitate evaluation of parts quality and development of counter-measures for tooling and equipment event parts; monitor/follow up on necessary improvements

*Audit at early development events and coordinate with other groups and/or plant for mass-production builds

*Facilitate manufacturing of inspection fixtures; includes verification

*Coordinate response to Engineering Design Changes; includes scheduling, cost, and on-time response to customer (these activities are coordinated across all departments)

*Detail orientation, highly accurate/precise, very well organized, excellent follow-up

*Strong verbal and written communication skills (including preparation of large presentations and meeting facilitation skills)

*Coordinate preparation and maintenance (updates) of all customer documentation

*Ability to clearly and effectively communicate and interact with all levels of the organization.

Requirements:

*Strong project management skills (including documentation)

*Experience with CATIA document creation

*Self-motivated; ability to work with minimal supervision under strict time constraints.

*B.S. in Engineering (preferred) or related field and/or 2-5 years or more of related experience/training required (or equivalent experience)

*Some overnight travel required

To be considered for this New Model Engineer job in Columbus, Ohio, please use the "apply now" button to submit your resume. If you have questions about the position please contact Clay Knisley at (614) 948-4703 or at clay.knisley@adeccona.com

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Columbus, OH

PROJECT ENGINEER

Adecco Engineering and Technology has an immediate job opening for a PROJECT ENGINEER JOB in Columbus, OH. You will be responsible for managing certain aspects of new model development projects from concept through mass production. Coordinate multi-disciplined project groups to ensure project success from both an engineering and business standpoint. Organize project teams to set and achieve overall project goals that meet or exceed our customers' requirements

Primary Position Responsibilities:

*Work with customer to establish product concepts and schedules

*Maintain project schedules and project tracking documents

*Work with the project leader to organize and lead internal project teams to set and achieve project goals

*Communicate project status to project leaders

*Develop solutions to unique multi departmental problems

*Negotiate with customers and suppliers to achieve best possible results for project success

*Other duties as assigned

Skills and experience:

*Bachelors Degree in Engineering

*Proficient on Powerpoint, Excel, Word and Outlook

*Excellent written and verbal communication skills

*Able to read and understand technical drawings

*Organization skills

*Leadership activities (Internships, Co-ops, Study abroad, Fraternity/Sorority)

To be considered for this position, please use the “apply now” button to submit your resume or email clay.knisley@adeccona.com with any questions.

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Columbus, OH

Data Entry - Job Posting

Title: Data Entry Clerk

Adecco is assisting a local client in recruiting for a current Data Entry Clerk job in Columbus. This is a long term temporary opportunity. As a Data Entry Clerk you will be responsible for entering and verifying alphanumeric data. This position will be entering emails addresses as needed and setting up time of day schedules. This candidate will be responsible for connecting Trane control systems to a central monitoring system. If you meet the qualifications listed below please Apply Now!

Responsibilities for this Data Entry Clerk job include:

• Responsible for configuring control equipment and business systems to communicate with monitoring center.
• Works with local office contacts to establish new connections and re-establish broken connections.
• Will investigate loss of communication with equipment and communicate with local servicing office to restore communication.
• Ability to accurately document and record customer/client information.

Qualifications:

• Associates Degree or Equivalent
• HVAC, I&C or Process Control a plus
• Experience with Trane Control systems a plus
• Previous experience with Computer Applications such as Microsoft Word, and Excel a must
• Flexability to work overtime and weekends as necessary
• Written and Verbal Communication skills

This will be an M-F 8:00am-5:00pm

Pay for this position is $11-$13/hr based on experience plus overtime as needed. This is a long term temporary opportunity.

Adecco provides one of the most comprehensive benefits package in the industry to contract workers. Benefits are available to you as a contractor after one week of employment.


Click on Apply Now to be considered for this Data Entry job in Columbus or any related opportunities with Adecco.


Equal Opportunity Employer Minorities/Women/Veterans/Disableddf-dc

Columbus, OH

Engineering Aides

Three (3) Engineering Aides needed for a manufacturer of energy efficvient products in Apopka, Florida! This is a six (6) month contract position paying $14.00 per hour. Ideal candidates will be familiar with schematics and UV units. Essential Duties:

*Perform all requirements to support the engineering Bill of Material Change process and procedures.

*Utilize basic design skills to determine form, fit, and function as they relate to assignments.

*Perform tolerance studies as well as recommend minor design changes.

Required Skills:

*May require a high school diploma or its equivalent with 0-3 years of experience in the field or in a related area

*Minimum 2 years experience using CAD tools (Solidworks,Pro/E, Cadkey, Autocad, etc.)

*Computer literate with MS Word, Excel, and Power Point

*Excellent verbal and written communication skills

*Detail oriented approach to work with solid organizational skills

Desired Skills:

*Proficient in Solidworks , Pro/E

*Pro/E solid modeling experience Mechanical design principals (machining tolerances, molding tolerances, o-ring grooves, classes of fits, etc.) ASME Y14.5 Geometric Dimensioning & Tolerancing knowledge

*Experience with controlled documentation systems such as ISO

*Direct production floor experience

If you are interested in this Engineering Aide job opportunity in Apopka, Florida then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Apopka, FL

Automation Technician

Automation Technician Adecco Engineering has two Automation Technician positions available in Greenville, Ohio with an automotive supply company. What you will do on DAILY basis:

*Provide technical support for the industrial equipment in all areas of the production facility

*Communicate with Engineers and other Technicians to discuss maintenance issues and decide what corrective action should be taken to fix problem

*Conduct preventative maintenance on industrial equipment such as hydraulics, pneumatics.

*Program robots, Greenville has Motoman and Yushin robots

*Contribute ideas for continuous improvement on processes and to enhance the quality of the products

*Read electrical schematics

*Maintain safety and housekeeping practices and lead by example

What we NEED to see on your Resume:

*Some level of real world experience possibly through an internship, coop, or full time work in an industrial maintenance field.

*Completed High School diploma is a must.

*Troubleshooting electrical systems, preferably for industrial equipment

*Ability to read electrical schematics

*Basic Microsoft Excel and Word skills

*Experience working with high electrical voltages

How you will REALLY IMPRESS us:

*Completed Certificate Program or Associate Degree in Automation, Electrical, Control Systems

*Experience with robots, specifically with Motoman or Yushin

*Specific PLC or Ladder Logic experience or examples

*HMI Experience

Salary for this DIRECT HIRE job: Starting hourly rate $15.73 After 3 months and successfully completing a test, you will upgrade to $17.05 per hour. After 12 months of successfully progressing with the company, your pay will increase to $17.92 per hour Shifts: One - 2nd Shift: 3:30 pm - 12:00 am One - 3rd Shift: 11:30 pm - 8:00 am How to Apply: Submit your resume in a Word Document directly to Lindsay Verhoff at: lindsay.verhoff@adeccona.com Feel free to ask questions! You can reach Lindsay directly at 614-948-4714

Greenville, OH

Quality Manager

Adecco Engineering and Technical is currently recruiting for a Quality Manager job opportunity located in Indianapolis, Indiana. The Quality Manager job will be responsible for meeting the requirements of their customers associated with manufacturing production. Quality Manager job responsibilities include: • Building and managing a team of Quality Technicians, Engineers and production associates around quality initiatives. • Develop, support and implement a quality system that meets qualitative standards (ISO/Lean Six Sigma/Regulated) • Drives improvements and savings within operations • Responsible operations in procurement, vendor management, qualitative standards. QUALIFICATIONS: • BS Degree with technical discipline or certification as a Quality Engineer • 7+ years experience within quality manufacturing. • Excellent organizational and communication skills. • Knowledge of process control and process capability. If you are interested in this Quality Manager job opportunity in Indianapolis, Indiana then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Darren McCloud at 317-842-2870 or darren.mccloud@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Indianapolis, IN

Corporate Warranty Engineer



Direct Hire Quality Engineer job in Columbus, Ohio with an automotive supplier. You will be responsible for performing quality engineering projects, assist with process improvements and problem solving, as well as utilize auditing techniques. You will also implement continuous improvement changes after working with customers, suppliers and internal teams. You will support product cost, quality and delivery goals. Quality Engineer Responsibilities include:

*Conducting root cause analysis.

*Using problem solving skills to solve quality issues

*Design experiments to test quality

*Conduct statistical process controls and mistake proofing

*Advise clients, management and other staff of the project status and problems often utilizing reports, graphs, and charts as needed

*Continuous improvement actions

*Identify potential or existing problems, performs analysis and provide counter measures.

*Oversees data collection and interpretation in order to coordinate improvement measures

*Interact with external customers, engineering team and suppliers.

*Verifying all documentation is accurate

*Must be able to work any shift and overtime as required to support the company scheduled targets, department initiatives and objectives in a quality and timing manner.

*Ability to travel for extended periods of time with limited prior notice

Qualifications to be considered:

*High School Diploma, GED or higher

*Minimum of 5 years in the Quality field with minimum 5 of those years in manufacturing environment.

*Automotive, plastic injection molding or manufacturing background preferred.

*Must be able to judge color visually and must pass the Farnsworth - Munsell Hue test every 2 years and pass with a minimum score of 50

*Computer skills in working with Windows operating system (Excel, Powerpoint, Access) as well as Spreadsheet software, Word Processor.

*Above average mathematical skills, written skills, and verbal skills.

*Ability to interpret blueprints, drawings, schematics, etc.

*Displays professionalism in a business environment

*Able to use basic measurements devices such as micrometers, calipers, indicators and etc.

To be considered for this position, please use the "apply now" button or send directly to Lindsay Verhoff at lindsay.verhoff@adeccona.com to submit your resume. Questions about the position? Please contact Lindsay at (614) 948-4714.

Dublin, OH

R&D Project Manager

Adecco, a Global Fortune 500 company, is the world leader in workforce solutions. Our Northeast diagnostics client company is currently seeking a R&D Project Manager As an Adecco associate, you can expect competitive rates and immediate benefits. Provide project management leadership and support for the Design Control projects, both local and global, including selected large scale Operation's projects and initiatives. This includes the development and monitoring of the project schedule, project plan and monitoring of project goals. Act as knowledge management agent to facilitate the transfer of learning across projects and to thereby improve overall project management within our client. Other responsibilities include the management & monitoring of team dynamics/health. Monitor, address and report timeline and budget variances and contingency options. Communicate project progress within the team, with support functions and with competing project teams. Initiate and lead the development of the project schedule and project plans focusing on: interfunctional connectivity, task relationships and durations, resource analysis and allocation, risks and contingencies. Assist in the development of R&D project budgets and forecasts. Set up and maintain tools/mechanisms to track project schedules, budgets, risk/contingency reporting. Assist in the development of project and financial reporting systems. Create a relaxed team environment to stimulate the group process and facilitate adaptation of new members. Orchestrate the team environment so that the project can be effectively managed, and so that relevant parties are involved. Proactively manage the political, interpersonal and organizational factors that affect a project. Identify and help resolve project conflicts. Be accessible to team members to take advantage of informal interactions that may impact the project. Manage projects in the best interest of team members, stakeholders and customer. Benefits include: paid holidays upon qualification, tuition reimbursement, 410k, service bonus, insurance (health, vision, dental, and life).

To be considered for this position, you must use the “apply now” button to submit your resume. If you have questions about the position please contact Rod Grays at 317-558-8866 or rod.grays@adeccona.com) Adecco is an Equal Opportunity Employer

Indianapolis, IN

Plastics Engineer

A Plastics Engineer job in Indianapolis, IN is available courtesy of Adecco Engineering and Technology. You would be using your expertise in plastic injection molding. You would be the go to resource on the production floor for technicians. You would be paid between $60-$70k annually. Plastics Engineer job responsibilities include: * Designing plastic injection molded automotive parts * Managing production floor for technicians * Troubleshooting is ideal, machines, molds, etc QUALIFICATIONS: * Five to seven years of experience * Automotive experience * Solidworks experience * Bachelor’s degree If you are interested in this Plastics Engineer job in Indianapolis, IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please Faith A. Hoskins at (317) 842-2870 or faith.hoskins@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Indianapolis, IN

R&D Product Engineer

An R&D Product Engineer job in Carmel, Indiana is available courtesy of Adecco Engineering and Technology. This position includes working within a multi-disciplined team of marketing, industrial design, and technical specialists chartered with the goal of “reinventing the company”. With this plan in place, the R&D Product Engineer will develop and mature concepts or technology into breakthrough products through the R&D Feasibility stage and transitions the product to the New Product Development (NPD) organization. You will be creating complex geometries and have the opportunity to use Surfacing and Advanced Assembly methods including laying out mechanisms, fabricating part design and drafting (using Pro/E). R&D Product Engineer job responsibilities include:

*Generation of Design Requirements from Product Requirements.

*Development of product concepts into functional and feasible models that meet performance requirements in a timely fashion.

*Development of feasibility designs that are mass producible and meet identified performance and cost requirements.

*Design using a variety of materials including thermoformed plastic/fiberglass/composites, ceramic/porcelain, brass, stainless

*Develop conceptual and detailed layout, design and engineering of components and complex assemblies

QUALIFICATIONS:

*The ideal candidate will possess a B.S. degree in a Mechanical Engineering (or MET)

*Eight+ years of design experience (or equivalent combination of education and experience). Must have two+ years (min of 2000 hours) of experience with Pro/E software

*Experienced in the design of plumbing products and manufacturing of plumbing products and performance standards is highly desired

*Create BOM’s and estimated costs for each design.

If you are interested in this R&D Product Engineer job in Carmel, Indiana then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Jim Cullen at 317-842-2870 or jim.cullen@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Indianapolis, IN

Forming R&D Engineer

Adecco Engineering and Technical has a direct hire opening for a Forming Engineer job in the Columbus, Ohio area. You would need a background in sheet metal forming practical knowledge, sheet metal forming simulation and 3D CAD. Three to Five years experience in Stamping forming CAE. You will also be responible for developing and executing research and development activity in the area of sheet metal forming/stamping die technology.

Responsibilities for the Forming Engineer job Include: -Create development plan that include target setting, testing activity and overall schedule -Creat development plan that include target setting, testing activity and overall schedule -Execute testing and analysis for specific them targets -Prepare, organize and report these results QUALIFICATIONS

-CAD design software experience -Sheet Metal Forming CAE expertise -Strong understanding of sheet metal material properties -Catia V5, Autoform and LS-DYNA preferred but not required

To be considered for this Forming Engineer job in Columbus, Ohio, please use the "apply now" button to submit your resume. If you have questions about the position please contact Clay Knisley at (614) 948-4703 or at clay.knisley@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Columbus, OH

Stamping Die Engineer

Adecco Engineering and Technical has a direct hire opening for a Stamping Die Engineer job in the Columbus, Ohio area. You would need a background in designing automotive transfer dies in 2D and 3D CAD systems. You will coordinate and successfully implement a die design schedule with daily tracking of progress. Investigate and troubleshoot die related problems during the manufacturing and installation process. Confirm die process layout for product based tooling sets

Responsibilities for the Stamping Die Engineer job Include: -Implement customer requests into assigned die designs -Correlate previous design content and results into new assigned die designs -Complete check process for die designs -Explain assigned die designs at expert design reviews and implement related revisions -Die Design of stamping transfer dies QUALIFICATIONS

-Solid design software experience -Strong communication capability with a wide range of associates -Able to make and follow plants/schedules -Die Design experience (Side Panel, Fender, Doors, Trunks, Roofs, Floors, Rear Inner

To be considered for this Stamping Die Engineer job in Columbus, Ohio, please use the "apply now" button to submit your resume. If you have questions about the position please contact Clay Knisley at (614) 948-4703 or at clay.knisley@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Columbus, OH

Electrical Computer Engineer

Adecco Engineering and Technical has an indefinite contract opening for an Electrical Computer Engineer job in the Columbus, Ohio area. You would need a background in hardware/software design along with between two and five years in Engineering on automated equipment. You will have 80% dedication to design and 20% on the manufacturing floor (debugging/installation). You will contribute to project planning and supervision. Pay will be based on experience.

Responsibilities for the Electrical Computer Engineer job Include: - PLC/HMI, robot, servo, inverter and safety controls troubleshooting - Production equipment controls debug - Equipment assembly, wiring, and installation - Troubleshooting of PLC's and HMI's - PLC/HMI programming - Read and understand electrical schematic drawings - Project Management - Customer interfacing QUALIFICATIONS - PLC and HMI Programming - Machine wiring, troubleshooting skills and basic computer skills - Understanding of electrical principles - Project leadership - Experience with C#/C++ using .NET 4.0 framework - Working with automated production equipment that includes power and control wiring, PLC/HMI programming, safety controls, servo/inverter set-up and robot programming -Electrical Engineering degree or Computer Science Engineering degree To be considered for this Electrical Computer Engineer job in Columbus, Ohio, please use the "apply now" button to submit your resume. If you have questions about the position please contact Clay Knisley at (614) 948-4703 or at clay.knisley@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Marysville, OH

Electrical Controls Engineer



Adecco Engineering and Technical is assisting a local client in recruiting for an Electrical Engineer job in Columbus, Ohio. This is a full time permanent opportunity. The Electrical Engineer will pPerform AC/DC power calculations. Design control panels. Design cable assembly drawings. Utilize Auto Cad and various PLC/HMI software packages. Modify/create PLC ladder logic. Modifies/creates hardware schematics. Modify/create I/O schematics. Responsibilities for the Electrical Engineer job includes:

-Working in a team atmosphere to modify/create automated equipment. -Determines equipment hardware modifications. -Determines equipment PLC software/HMI modifications. -Meets equipment safety needs for control engineering. -Supports equipment debug/install in the manufacturing departments.

Qualifications:

-PLC programming (Omron, Mitsubishi, Yaskawa). -Strong organizational skills. -Self-motivated and able to work with limited supervision. -Proficient with Microsoft Office (Excel, Word and PowerPoint). -AutoCAD.

-Knowledge of equipment safety regulations. -Knowledge of NEC/NFPA 79 standards.

To be considered for this Electrical Engineer job in Columbus, Ohio please use the "apply now" button to submit your resume. If you have questions about the position please contact Clay Knisley at (614) 948-4703 or at clay.knisley@adeccona.com

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Columbus, OH

Lead Seating Engineer

A Lead Seating Engineer job in Indianapolis, Indiana is available courtesy of Adecco Engineering and Technology. You will need to have a BSc in Engineering, preferably Mechanical or similar, and will have worked in seating product development, preferably within the automotive/heavy vehicles industry for at least five years. As this is a Lead role, previous leadership or mentoring experience is required. You will have the opportunity to design, develop, test and release seating products and work closely with the model shop to assemble prototype parts. A key portion of this role will be to conduct regular design reviews and peer reviews. The salary for this position will depend on experience and will be in the $90,000+ region. Lead Seating Engineer job responsibilities include: • Design, develop, test and release seating products • Utilize DFMEAs to lead development process • Develop and execute test and validation plans • Lead development team by delegating work and prioritizing tasks QUALIFICATIONS: • BSc in Mechanical Engineering or Mechanical Engineering Technology • At least five years’ experience in a similar role is required • Knowledge of seating structure and soft-goods required • Proficiency in 3D modeling preferred If you are interested in this Lead Seating Engineer job in Indianapolis, Indiana then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Jim Cullen at 317-842-2870 or jim.cullen@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Westfield, IN

General Labor - Construction/Roof Truss Builder

We have an exciting opportunity in Delaware Ohio working for a company that manufactures commercial roof trusses. If you have construction experience, we would love to talk to you!

Skills Needed:

Use of various construction tools
Labor helping the line get supplies
Material Handling
Lifting
Reading Blueprints

Required Experience:

Framing, building, contractor, carpentry, construction background
MUST SUBMIT RESUME WITH EXPERIENCE LISTED
Dependable, hard worker
Ability to lift 50 lbs. repetitively with assistants
Background reviewed case by case
STB over the ankle required
Long pants t-shirt or better no rips, tears, or holes

Apply online at www.adeccousa.com
Questions? Call 740-363-2485

Watch your email for skill evaluations from Xpert-Proveit Testing & take those evaluations as soon as possible

We look forward to working with you and THANK YOU for choosing Adecco, the largest staffing organization in the world.

Adecco Staffing U.S. is the nation’s leading provider of recruitment and workforce solutions. We are the pre-eminent workforce management partner for Fortune 500 companies and career advisement expert for American workers, serving all of the key industries and professions that drive our economy forward. Adecco has over 400 career centers and, on any given day, connects 70,000 talented workers to the best job opportunities across the country, making us one of America’s largest employers.

Adecco North America is an Equal Opportunity Employer

df-dc

Delaware, OH

Project Controls Specialist

A Project Controls Specialist contract position in Richmond, VA is available courtesy of Adecco Engineering and Technology. The prime responsibilities are budgeting, contract administration, planning, scheduling, cost control, forecasting and invoicing support for Fleet Outage Services.

Skills

Knowledge of MS Word, Access and Excel needed. Turbine/Generation equipment or other heavy rotating equipment knowledge preferred. JDE or SAP Interface / create requisitions, cost reports, invoice payments Estimating techniques Forecasting techniques Planning/scheduling interface Invoicing/billing Excellent organizational skills, flexible, adaptable to unexpected situation and sudden changes. Excellent communication skills, written and oral.

Experience

Minimum 2 years experience in cost analysis and / or construction project management support required.

If you are interested in this Project Controls Specialist job opportunity in Richmond, VA., then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Mr. Chris Wilkins at 410-290-3262 or christopher.wilkins@adeccona.com Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Richmond, VA

Quality Control III

A Quality Control III job in Orlando, Florida is available courtesy of Adecco Engineering and Technical. Candidates must have previous tool manufacturing experience. Responsibilities include performing first article inspection, final and in-process testing to customer and design requirements of our precision crimping tools. The salary for this position is based heavily on previous experience. Quality Control III job responsibilities include:

*Perform inspection of vendor, in process, or finished goods product utilizing various hand tools and automated analysis equipment for final analysis and documentation.

*Inspect product using micrometers, calipers, height gages, and other handheld measuring devices.

*Inspect product visually.

*Record inspection results on inspection forms, computer database, or charts.

*Reference blueprints, specifications, and work instructions.

Qualifications:

*Must be able to read blueprints.

*Experience with measuring small piece part production lots, preferably metal.

*Thorough knowledge and use of Micrometers, Calipers, Thread & Pin Gages, Surface Plates and Height Gages.

*Ability to follow documented procedures and standards.

*Must be familiar with data entry and proficient with Microsoft Office.

*High School Diploma and a minimum of five (5) years of related Quality Control experience.

If you are interested in this Quality Control III job in Orlando, Florida then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled Only local candidates will be considered as no relocation or per diem is available. Candidates must be able to successfully pass a background check and drug screen. Salary based on experience. Candidates must apply through the "Apply Online" function for consideration, or create a profile at www.AdeccoUSA.com then attach your resume to this positing. Qualified candidates will be contacted for interview. NO PHONE CALLS, PLEASE. If you are interested in industry specific articles and news about Engineering & Technical please visit our Facebook page at http://www.facebook.com/pages/Adecco-Engineering-Technical/13825422252?ref=mf and become our Fan.

Orlando, FL

Senior Project Manager

A Senior Project Manager job in New Orleans, Louisiana is available courtesy of Adecco Engineering and Technology. The ideal candidate will have a Bachelor of Science degree with 10 plus years of EPC experience. You will lead in the execution of Transmission and Substation projects from initiation through close out. You will be responsible for managing project budgets ranging from $250K - $50 million. Senior Project Manager job responsibilities include: -Manage multiple complex Transmission & Substation projects; safety, cost, schedule, scope and quality -Manage project schedules and deliverables to meet external customer goals -Management of subcontractors for both services (geotech, surveying, Right-of-way, etc.) and construction (civil and electrical) QUALIFICATIONS: -PMP Certification Required -Transmission and Distribution Experience preferred -Six Sigma Black Belt -Skilled in Primavera, Microsoft Project

If you are interested in this Senior Project Manager job in New Orleans, Louisiana then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Kevin Sapp at 504-410-2076 or kevin.sapp@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Mandeville, LA

electrical engineer

An Electrical Engineer job in New Orleans, LA is available courtesy of Adecco Engineering and Technical. Ideal candidate will have a bachelor’s degree and experience in the utilities industry. You will design power, electric utility and transmission lines. You will have relay and protection controls abilities. Electrical Engineer job responsibilities include: -Design, develop, implement and analyze power systems; substation, relay protection, transmission design -Design electric utilities and lines QUALIFICATIONS: -Bachelor of Science degree -Five plus years of professional experience preferably in electrical transmission and distribution -Skilled in PLS-CADD . If you are interested in this Electrical Engineer job in New Orleans, LA then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Kevin Sapp at 504-410-2076 or kevin.sapp@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Mandeville, LA

Civil Engineer

A Civil Engineer job in New Orleans, Louisiana is available courtesy of Adecco Engineering and Technical. The ideal candidate will be a degreed candidate with substation design experience. You will create drawing packages for substation Relay Protection that include wiring diagrams, schematics, protection panels, one-line and three-line diagrams. You will performed load calculations for load panels, battery systems, and other various substation components. Civil Engineer job responsibilities include: -Work with engineering and designers in substation designing -Work on all phases and tasks associated with transmission and distribution designs QUALIFICATIONS: -Bachelor of Science degree -7 plus years of professional experience preferably in power and utility industry -Skilled in AutoCAD, MircroStation and Excel. If you are interested in this Civil Engineer job in New Orleans, Louisiana then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Kevin Sapp at 504-410-2076 or kevin.sapp@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Mandeville, LA

electrical engineer

Adecco Engineering and Technical is currently recruiting for a Full Time Sr. Electrical Engineer job opportunity located in the St. Louis metro area. Must be able to work with little assistance to design electrical/electronic products as assigned. Must have a minimum of 7 years Electrical Engineering experience specifilcy with electronic circuit design. Requires a BSEE. Position will pay up to $80,000 per year based on experience. Sr. Electrical Engineer job responsibilities include: *Assist in establishing design criteria to meet customer requirements *Design unit per design specification or per sales design data or per individual customer specification *Coordinate electrical design with firmware/software engineer so the system will integrate properly. *Supervise other engineers and technicians assigned to a particular project *Evaluate design concepts through a theoretical study, a breadboard and a prototype, having design reviews as necessary *Record design and test data. *Release to Mechanical Engineering section when design has been confirmed, with approved schematics and electrical bill of materials. *Use standard parts and circuits when possible and calculate stress information on all components used in design. *Write Theory of Operation *Verify correctness of final schematics, printed circuit boards, and bill of material *Assist Technical Writer in writing manual and sales bulletin on products designed *Estimate material and engineering effort required on jobs being quoted as assigned by Supervisor. *Keep current engineering estimate sheets and work schedules. *Generate quotes in response to sales/marketing inputs. *Performs all other duties as assigned. If you are interested in this Sr. Electrical Engineering job opportunity in the St. Louis Metro area then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Sheldon Rushing at sheldon.rushing@adeccona.com Adecco Engineering and Technical has a current job opportunity in St. Louis metro area, for a Sr. Electrical Engineer.

Highland, IL

PROJECT ENGINEER

Based out of our Columbia, IL office (no relocation provided) 30%+ travel to project locations nationwide

*Manages industrial petroleum terminal construction projects from inception thru completion (Project development, design, permitting, civil, mechanical, electrical, etc.)

*Process piping construction projects using our internal crews (pipe fitters, pipe welders, pipe insulators, and labors) is our main business

*We are heavy into liquid asphalt storage but we also delve into light petroleum products (gasoline, diesel, jet fuel, etc.), crude oil, biodiesel, ethanol, etc.

*Emphasis on mechanical process piping construction

*Designs, estimates, manages internal construction crews & subcontractors

*In-house design elements: general site layout, P&ID’s, process piping, pumps & heating equip, thermodynamics and energy efficiency, general electrical

*Responsible for project P&L

*Point of contact for Customer

*Contract negotiation with customer, vendors, and subcontractors

*Pre-bid walkthroughs, ongoing site visits, project closeouts.

*AutoCAD proficiency a big plus for those times when you need to design, draw up, and detail something yourself

*MS Office (Excel, Word, Outlook), MS Project, AFT Fathom 8

*Self-starter, self-motivator, here it is make it happen.

Columbia, IL

Project Manager - Construction

A Construction Project Manager job in Washington, PA is available courtesy of Adecco Engineering and Technology. You must have experience/knowledge of the Oil & Gas industry to be considered for this position. In this role, you will help manage/coordinate Sub-Contractors to execute job on schedule and on budget. Also, You will interface with clients on project related issues, and will work internally to help establish project schedules and coordinate material deliveries. Construction Project Manager job responsibilities include: • Review and understand the project and client contract documentation of assigned projects. • Create a project plan that meets or exceeds client expectations. • Proactively identify and solve problems to minimize risk. • Ensure timely project completion through project scheduling, expediting of material deliveries and the management of material and document submittals/approvals. QUALIFICATIONS: • Engineering Degree • Two to five years Construction Project Management experience. If you are interested in this Construction Project Manager job in Washington, PA then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Gina Jackson at Gina.Jackson@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Washington, PA

SR. QUALITY ASSURANCE ENGINEER

Direct Hire Sr. Quality Assurance Engineer job in Upper Sandusky, Ohio with an automotive supplier. You will be responsible for coordinating paperwork associated with new model launches and maintain documents that is required by the customer. You will be the initial contact for coordinating troubleshooting and corrective actions in order to reduce internal process variation and have quality improvements. You will typical interact with customers, engineering team, procurement department, and production staff. Sr. Quality Assurance Engineer Responsibilities include:

*Process all part inspection instructions

*Obtain customer approval for control of parts

*Complete and sign-off on tailored customer approval process

*Issue Quality Concerns as needed

*Meets quality and quantity levels of assigned work, housekeeping, and safe work practices

*Interact with external customers and internal customers

*Monitor and enforce ISO/TS16949 and ISO 14001 policies and procedures

*Must show that data collection method and actual condition is correct

*Monitor control plans for consistent quality while making necessary adjustments

*Coordinates the accepted and/or rejected material movement between departments, customers, and suppliers

*Oversee the collection of data and interpretation in order to coordinate improvement measures

*Generate reports, graphs, and charts as needed to provide weekly reports for customers

*Inspect and test materials and products for aesthetic and dimensional accuracy using various equipment

*Assists with training other Engineers and supervise hourly technicians

Qualifications that need to be on your resume:

*High School Diploma, GED or Higher.

*Six or more years experience in the Quality field

*At least three years in a manufacturing environment.

*Able to use basic measurement devices such as micrometers, calipers, indicators, coordinate measuring machine.

*Computer skills in working with Windows as well as Word Processor and Spreadsheet software

*Ability to interpret blueprints and drawings

To be considered for this Sr. Quality Assurance Engineer job in Upper Sandusky, Ohio apply now or send Word Documented resume to Lindsay Verhoff at lindsay.verhoff@adeccona.com. Questions? Call Lindsay at 614-948-4714.

Upper Sandusky, OH

Requirements Management Consultant

Requirements Management Contractor needed for Melbourne, FL! Role Summary/Purpose The Requirements Management contractor will be responsible for assisting in the migration from Requisite Pro to DOORS, developing and reporting on key Requirements Management metrics, and development and delivery of training to teams in DOORS. Essential Functions / Responsibilities: • Assisting in the migration from Requisite Pro to DOORS • Develop key metrics to assess regional and global progress of Requirements Managements systems and implementation • Deliver key metrics to assess project traceability of requirements to validation test results • Provide monthly updates to standard requirements management metrics dashboard for executive project portfolio reviews • Train regional teams on compliance matrix creation and updates in DOORS • Perform individual and team level DOORS training to engineering organization • Interacts with all levels of engineering management and with Program managers and Product managers Basic Qualifications: • Bachelor’s Degree in engineering, computer science • Demonstrated experience in Requirements Management • Minimum 5 years of experience using DOORS • Experience with project scheduling tools • Proficiency with Microsoft Office Suite of tools, especially Excel and PowerPoint Desired: • Strong technical aptitude, including applicable engineering tools and systems • Strong oral and written communication skills • Strong interpersonal and leadership skills • Demonstrated process orientation in approach to work • Experience with Rational Publishing Engine • Experience with DOORS Extension Language (DXL) 6 month contract - could be a contract to perm opportunity for the right candidate Pay - Between $40-45/hr based on experience Only local candidates will be considered as no relocation or per diem is available. Candidates must be able to successfully pass a background check and drug screen. Salary based on experience. Candidates must apply through the "Apply Now" function for consideration, or create a profile at www.AdeccoUSA.com then attach a MS Word resume to this posting. Qualified candidates will be contacted for interview. NO PHONE CALLS, PLEASE. If you are interested in industry specific articles and news about Engineering & Technical please visit our Facebook page at http://www.facebook.com/pages/Adecco-Engineering-Technical/13825422252?ref=mf , and become our Fan. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Melbourne, FL

Quality Assurance Engineer

A Quality Assurance Engineer job inSt. Louis,MOis available courtesy of Adecco Engineering & Technology. You will be working in a manufacturing environment reporting directly to the QA Manager. We are searching for someone in the range of one to four years of professional experience to go along with a BS/BA degree. This will be a direct position with a client located inSt. Louis,Mo Quality Assurance Engineer Responsibilities:

*Direct and plan activities associated with development, application, and maintenance of quality standards and regulations regarding industrial processes, materials, and products that will meet with ISO and other regulatory standards (AS, ASME, FAA, FDA).

*Direct quality control activities, audits, contract reviews and customer requirements

*Determine quality improvement parameters relevant to manufacturing processes through data analysis.

*Experience using 8D principles.

*Maintain internal and external audit programs

*Will interact with Customers

*Handle others corrective action for customer returns

Qualifications:

*Bachelor in Engineering or related field

*Three plus years of professional experience required

Please apply online and send questions to drew.peck@adeccona.com

Saint Louis, MO

Mechanical Engineer

A Mechanical Engineering job in St. Louis, MO is being offered through Adecco Engineering for a highly respected organization. This person will be working with a team of engineers solving issues with medical and military clients. A high level of Solidworks proficiency is required. Responsibilities: Generates product design specifications from customer needs analysis and market research data

*· Creates and maintains project plans

*· Develops new product concepts

*· Prepares product or system layouts, BOMs, and detailed drawings and schematics

*· Facilitates production of prototypes and works with manufacturing engineering to develop manufacturing plan

*· Creates FMEAs, interface matrices and design verification and validation plans

*· Verifies through analysis and test that design meets functional and performance specifications

QUALIFICATIONS:

*BSME

*Proficient in Solidworks

*FEA experience preferred

*Excellent communication skills - verbal and written

*Extensive design, prototyping and test experience

*Knowledge of industry regulations a plus

Candidates must be legally authorized to work in the U.S. for any employer without limitations. Sponsorship of H1-B visas will not be available Please apply on line or send resumes to drew.peck@adeccona.com

Saint Louis, MO

EPC Construction Manager

EPC Construction Manager
Napanee, Canada
Direct-Hire / Permanent Position
$135K per year

Adecco direct hire group is assisting a client in finding a qualified EPC Construction Manager to be on-site at location in Napanee, Canada. In this position, you will be responsible for the overall management of industrial construction projects up to $200M with up to 750 skilled craft personnel. Our client is the nation?s largest builder of gas-fired power plants in the U.S. and Canada and offers excellent wages, benefits and per-diem.

As the EPC Construction Manager, your responsibilities will include:

*Management of construction effort to ensure project is constructed according to design, budget and schedule

*Proactive leadership with safe work practices/procedures

*Ensure quality assurance programs are implemented per customer requirements

*Establish and implement construction schedules, methods, manning charts and material/equipment requirements

*Controls jobsite expenditures for labor, equipment, material and services

*Develop, implement and administer jobsite security plan

*Participate in contract and subcontract negotiations as needed

*Ensure all permits and licenses are in place prior to the start of construction



Qualifications:

*20+ years of experience in construction management

*Ability to work / live in Canada

*Experience in managing large EPC power generation projects

*Thorough knowledge of all aspects of construction including: technology, equipment, methods, procedures/standards and union jurisdiction

*Strong Union experience

*Excellent communications both written and orally

*Willingness and ability to travel and interact professionally with stakeholders



Our client offers an excellent overall compensation package including: Salary; Medical, Dental and Vision benefits; 401K; Car allowance and Per-diem living expenses. This is a permanent position and is not subject to layoff after project completion. Applicants must be willing to travel and relocate as needed.

TO APPLY: Please click on ?Apply Now? and complete the application OR send a resume to brett.windham@adeccona.com. All applications and resumes are held in strict confidentiality.

Adecco, Better Work, Better Life!
EOE.df-dc

Canonsburg, PA

Construction Site Manager

Construction Site Manager
York, PA
Direct-Hire / Permanent Position
$150K

Adecco direct hire group is assisting an industrial construction company based in Canonsburg ,PA in recruiting for a Construction Site Manager. This position will require you to be on-site at specific projects full time and will relocate as projects are completed. This is a permanent position with our client and is not subject to lay-off after project completion. Our client offers excellent pay and benefits as well as a car allowance and per-diem pay for living expenses.

As the Construction Site Manager, your responsibilities will include:

*Providing overall administrative and technical direction and management for major power / industrial construction projects related to gas-fired power plants

*Ensure on-schedule completion within or below budget in accordance to contractual obligations

*Responsible for implementing company HSE programs

*Work with company personnel to develop budgets, schedules and plans for various elements of each project

*Monitor and report to management on the progress of all project activity

*Actively oversee 12-15 direct reports

*Coordinate with workers Unions for various contracts and obligations



Qualifications:

*15-20 years of construction site management experience preferably in power plant construction

*Excellent communications skills both written and orally

*Thorough knowledge of industry practices and regulations including permitting and labor agreements/negotiations

*Strong sense of ethics, integrity, assertiveness and urgency



Our client is the nation?s leader in industrial construction of gas-fired power plants. They have offices in both the U.S. and Canada. Total compensation package includes: Salary; Medical, Dental and Vision benefits; 401K, Per-diem and car allowance. Applicants must be willing to relocate to different areas of the U.S. depending on project.

TO APPLY: Please click on ?Apply Now? or send a resume and salary requirements to brett.windham@adeccona.com. All applications are held in strict confidentiality.

Adecco, Better Work, Better Life!
EOE.df-dc

Canonsburg, PA

Catering Sales manager

Adecco is currently assisting a local client in their search of a Catering Sales Manager in Bradenton, FL. This is a direct hire opportunity. As a Catering Sales Manager you will be responsible for growing the catering and event sales operations through personal outreach, relationship building and promotional activities within the community. Please apply now if you meet the qualifications listed below!

Responsibilities for this Catering Sales Manager job include:

¿ Develop strategies to meet annual sales goals
¿ Act as ambassador of the organization at expos, trade shows and networking events to promote catering and build sales
¿ Facilitate smooth transition of booked events to the Event Coordinator and ensure client satisfaction through completion of event
¿ Coordinate promotional events on and off premises
¿ Solicit new and existing clients in order to meeting sales expectations
¿ Perform other duties for catering events as needed


Qualifications:

¿ Associates degree and at least 3 years of hospitality or catering sales experience
¿ Ability to establish, develop and maintain relationships with all levels of clientele
¿ Must have the ability to handle multiple priorities within a deadline sensitive environment
¿ Impeccable sales and negotiation skills
¿ Proficient in Microsoft Excel, Microsoft Word, Internet and Social Media


Apply Now to be considered for this Catering Sales Manager position in Bradenton, FL or you can visit our website www.adeccousa.com to search for other opportunities that are currently available.


Equal Opportunity Employer Minorities/Women/Veterans/Disableddf-dc

Bradenton, FL

Sr. Electrical Firmware Engineer

A Sr. Electrical Firmware Engineer job in New Orleans, Louisiana is available courtesy of Adecco Engineering and Technology. The ideal candidate will have a bachelor’s degree in with seven plus years of firmware development experience in a product design environment. You will design, develop, and test low level, real time embedded firmware solutions for marine imaging and positioning products. You will design new products from conception through testing, documentation, manufacturing, and in-field support. Sr. Electrical Firmware Engineer responsibilities include: -Responsible for the detailed design in real time embedded firmware development -Generation of technical design requirements, specification, and test procedure documents -Focus of this position is seismic data acquisition firmware QUALIFICATIONS: -Skilled in C, NI LabVIEW, Microcontroller: Freescale 9S12 16-bit Microcontroller and TI MPS430, CodeWarrior and Code Composer Studio -Experience with GIT and CVS source control -Candidate should have experience in the following interface areas: A/D Converters, Serial Bus (SPI), I2C, Flash EPROM programming, and Serial Data Communication controllers If you are interested in this Sr. Electrical Firmware Engineer job in New Orleans, Louisiana then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Kevin Sapp at 504-410-2076 or kevin.sapp@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Harahan, LA

SR Mechanical Engineer Supervisor

A SR Mechanical Engineer job in New Orleans, Louisiana is available courtesy of Adecco Engineering and Technical. The ideal candidate will be a degreed engineer with 10 plus years of engineering experience. You will work with a team of engineers and designers. You will provide technical system design and development for marine industry products. SR Mechanical Engineer Supervisor job responsibilities include: -Work with a team of engineers and designers working on hydraulic, automation and electrical marine industry products -Domestic and International travel to support product line with clients including on marine vessels -Assist in the design, analysis and cost and reliability of mechanical systems QUALIFICATIONS: -Bachelor of Science degree -10 plus years of engineering experience including working with hydraulic systems, electro-hydraulics, and controls and automation -Skilled in Vision systems, RFID systems, and hydraulic systems If you are interested in this SR Mechanical Engineer Supervisor job in New Orleans, Louisiana then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Kevin Sapp at 504-410-2076 or kevin.sapp@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Harahan, LA

Mechanical Engineer

A SR Mechanical Engineer job in New Orleans, Louisiana is available courtesy of Adecco Engineering and Technical. The ideal candidate will be a degreed engineer with 7 plus years of engineering experience preferably in the aerospace or marine industry. You will determine product design requirements. You will plan and develop prototypes of products and systems. SR Mechanical Engineer job responsibilities include: -Perform engineering functions including ECNs, build packaging, installation and verification -You will design marine products and seismic sensor testing -Perform detail design work, failure analysis, and product testing QUALIFICATIONS: -Bachelor of Science degree -Seven plus years of product design and support experience -Experience in finite element analysis, LabView If you are interested in this SR Mechanical Engineer job in New Orleans, Louisiana then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Kevin Sapp at 504-410-2076 or kevin.sapp@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Harahan, LA

CNC Programmer / Integrator

An CNC Programmer / Integrator job in Maryland Heights,MO is available courtesy of Adecco Engineering and Technology. Experience with the Fanuc Fapt Ladder III program is required. This individual is responsible for evaluating and implementing innovative CNC controls into specialized machine tools. The salary for this position is ranging between $80K-$120K. Relocation assistance will be provided as necessary. CNC Programmer / Integrator job responsibilities include: • Developing and configuring machine control hardware and software • Integrating secondary equipment • Analyzing pneumatic control design • Arranging concept drawings, proposal documentation and cost analysis QUALIFICATIONS: • Must possess a BS degree in Electrical Engineering (or comparable technical degree) • Must have 3-5 years experience in control design • Must be proficient in Fanuc Fapt Ladder III software • Should obtain professional knowledge of AutoCAD • Candidate must be able to travel up to 50% If you are interested in this CNC Programmer / Integrator job in Maryland Heights, MO, then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology, go to www.adeccousa.com. If you have questions about the position please contact Lauren Potter at Lauren.Potter@adeccona.com . Equal Opportunity Employer Minorities/Women/Veterans/Disabled

St. Louis, MO

Inside Sales Representative



Adecco is currently assisting a local client in their search for Sales Assistants or Junior Sales Associates. Selected candidates will work in a modern office environment receiving calls and contacting customers to offer our products and services. The successful candidate will receive training on the product line and services the customer provides. Work takes place mostly in the Northern Virginia office but there will be a chance -for selected associates- to participate in trade shows both in and out of town. REQUIRED SET OF SKILLS • Excellent telephone manners • Ability to quickly learn new skills • Good with customers (likeable/outgoing) • Strong background in MS Office applications (Word and Excel) TASKS

*Answer incoming sales phone calls

*Preparing quotations for customers and E-mailing them

*Closing business deals over the phone

*Preparing invoices for customers

*Following up daily with pending quotes/decisions

*Assist in the development an update of marketing tools including website and social media

*Attend customer service calls; case resolution, claims, deliveries, etc.

*Maitain an up-to-database of customers and prospects

*Participate in conferences and exhibitions as directed by the customer

To be considered for this position, please use the “apply now” button to submit your resume. If you have questions about the position please contact Mr. Ken Butterman at 410-290-3262 or at kenneth.butterman@adeccona.com.

Chantilly, VA

Field Service Engineer

A Field Service Engineer job in Export, PA is available courtesy of Adecco Engineering and Technical. You must have a strong mechanical aptitude to be considered for this position. The position is responsible for assisting global customers and distributors with technical issues related to the start-up commission, maintenance, overhauls, repairs and troubleshooting of centrifugal air compressors. Field Service Engineer job responsibilities include: • Communicate with customers and field service personnel on service issues. • Travel to customer locations on a periodic basis. • Provide training and support to customers and field personnel. • Coordinate the repair activities of returned equipment. QUALIFICATIONS: • Bachelor of Science in Engineering • Minimum three years work experience in a field service position. • Excellent customer service skills. • Ability to travel 20% National and 10% International. If you are interested in this Field Service Engineer job in Export, PA then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Gina Butera at Gina.Butera@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Export, PA

Product Design Engineer

A Product Design Engineer job in Export, PA is available courtesy of Adecco Engineering and Technical. You must have experience in research and development to be considered for this position. The Product Design Engineer will design, test and provide product support of centrifugal compressors and auxiliary equipment. Product Design Engineer job responsibilities include: • Design of bearings, seals, high speed gearing, heat exchangers, and pressure vessels. • Responsible for hands-on supervision of prototype assembly and testing, along with subsequent product design support. • Position will work closely with marketing, designers, and manufacturing engineers as part of a small, focused development and product oriented team. QUALIFICATIONS: • Bachelors Degree in Mechanical Engineering, Aerospace, or equivalent experience. • One to five years of hands on experience is required. • Must have excellent communication skills. • Must be a team player If you are interested in this Product Design Engineer job in Export, PA then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Gina Butera at Gina.Butera@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Export, PA

Engineering Technician

A Engineering Technician job in Indianola, PA is available courtesy of Adecco Engineering and Technical. You must have experience with troubleshooting electro-mechanical systems and sub-systems to be considered for this position. The person chosen for this position will support design efforts including debugging of Electrical and Mechanical components. Engineering Technician job responsibilities include: • Assist the Design and Verification engineers to ensure the design is meeting product requirements through execution of test protocols. • Conduct characterization tests and analyze the results. • Troubleshoot and resolve basic technical problems. QUALIFICATIONS: • Bachelor's Degree in Electrical or Mechanical Engineering is preferred. • Strong attention to detail, and good work ethic are required. • Experience with Surface Mount Soldering is desirable. • Computer knowledge and MS Office Skills are required. If you are interested in this Engineering Technician job in Indianola, PA then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Gina Butera at gina.butera@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Indianola, PA

Electrical Project Manager Job Alexandria, VA

Adecco E&T is recruiting for an Electrical Project Manager job in Alexandria, VA. You will provide the daily management of an assigned installation projects. Manage on-site day-to-day activity of employees and subcontractors. Minimum of five (5) years previous project management experience required, ten (10) years preferred. Minimum of five (5) years previous electrical or systems integration experience required, ten (10) years preferred. Electrical Project Manager Job in Alexandria, VA Job Duties: • Initiating and discussing scope of work for security related construction with general contractor, subcontractors, and client staff as directed by government client. • Coordinating security related general contractor work to include: site visits, conference calls, project schedule, and coordinating with local office. • Provide the daily functional and budgetary management of an assigned installation projects. Provide supervision and monitoring of security related construction schedules and coordination of on-site technical work from start up, to check out, commissioning and final project acceptance. • Review contracts and schedule requirements and ensure coordination of procurement and delivery of materials, field office involvement, and subcontractors, to meet contractual and profitability requirements. • Manages on-site day-to-day activities to include directing employees and subcontractors on assigned projects, participation in and documentation of all on-site project meetings, as well as acting as the main point of contact in negotiation of change orders with all parties. • Maintains all records of project status, changes, material flow, and other control records as well as required reports, both internal and external. Furnish and maintain all related project correspondences, claims, punch list records, daily on-site work logs, audits, project schedule, and close-out analysis for contracts. • Establish, maintain and foster effective communications between customer, engineering, technical support and any other related on-site construction trades. • Provide to Technical Services, Engineering management, and all other project stakeholders as necessary, any technical feedback that may improve productivity and/or quality engineering design methods, as well as assist with review and/or adjustment of project technical and design documents. • Assist sales representative in the proposal and preparation of contracts for large systems to ensure close out profitability by providing subcontractor recommendations. • Assists management with monthly forecasts as well as keeping management and subordinates informed of progress. Qualifications: • Minimum of five (5) years previous project management experience required, ten (10) years preferred • Minimum of five (5) years previous electrical or systems integration experience required, ten (10) years preferred. • Previous technical and/or installation experience with Access Control, CCTV, Intercom, and/or IDS systems required, familiarity and experience with Hirsch, Software House, Lenel, Radionics, American Dynamics, and/or Aiphone security system hardware and software preferred. • Experience creating and managing project schedules in MS Project preferred. Skills: • Ability to effectively manage numerous small to medium sized projects (10K-500K) or several medium to large projects (500K-2M) simultaneously. • Ability to organize and prioritize workload and resources for effective project implementation. • Understanding of and ability to assistance with technical aspects of design and installation of physical security systems. • Demonstrated problem solving and ability to independently carry out responsibilities under general supervision. • Excellent written and verbal communication skills coupled with demonstrated judgment skills. • Ability to effectively interact with all levels of the TycoIS and customer organization. • Excellent PC skills (word processing, spreadsheet, presentation). • Ability to function as an effective team leader and team member. • Must be a self-motivated and organized individual. • Maintain a positive working environment. • Ability to travel Please APPLY NOW and send resumes in word format to Kenneth.Butterman@adeccona.com Adecco is an EEO.

alexandria, VA

Quality Compliance Specialist (POST ONLY)



A Quality Compliance Specialist job in Warsaw, Indiana is available courtesy of Adecco Engineering and Technology. As a Quality Compliance Specialist, you will support the internal and external audit programs as required including audits execution and follow-up of actions to resolve findings. You will also support effective quality processes and systems to ensure compliance to applicable Quality System Regulations. Quality Compliance Specialist job responsibilities include: • Maintain quality system processes in compliance with GMP/ISO quality standards • Support and track investigations and resolutions of audit findings • Assist in the development of new work instructions and training • Support corporate audits and external agency audits including FDA and other certifying bodies, government agencies, alliance partners, and consultants, if necessary QUALIFICATIONS: • Bachelor’s degree in engineering or related discipline • Minimum five (5) years of experience in quality systems or quality assurance • Quality Auditor certification preferred (ASQ CQA or ISO 9000 Lead Auditor) • Proficient knowledge of ISO 13485, Medical Device Directive, and FDA Quality Systems Regulations If you are interested in this Quality Compliance Specialist job in Warsaw, Indiana then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Suzanne Spellman at suzanne.spellman@adeccona.com or 317.842.2870. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Warsaw, IN

Technical Writer (Post Only)

A Technical Writer job in Warsaw, IN is available courtesy of Adecco Engineering and Technology. You must be able to create and write various types of technical documents including engineering plans and reports, specifications, manuals, references and technical summaries. You must also have three to five years experience in medical device or regulated industry. Technical Writing job responsibilities include: • Plan, research, analyze and create content using technical writing theories methods and tools • Comply with Quality System standards • Interpret industry technical writing standards and adapt them to customer needs • Explain scientific and technical ideas in simple language QUALIFICATIONS: • Bachelors Degree in scientific or engineering field • Three to five years experience with a Bachelors degree, One to three years experience with Masters • Experience in a regulated environment • Experience in a matrix environment If you are interested in this Technical Writer job in Warsaw, IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Justin Flamion at 317.709.6856 or Justin.Flamion@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Warsaw, IN

Quality Senior Engineer (POST ONLY)

Quality Senior Engineer jobs in Warsaw, IN are available courtesy of Adecco Engineering and Technology. As a Quality Senior Engineer, you will be responsible for resolving issues by identifying and applying solutions from acquired technical experience and guided precedents. You will plan and lead projects by identifying and organizing activities into time dependent sequencing with realistic timeliness. Quality Senior Engineer job responsibilities include: • Provides leadership for quality engineering projects from concept through design, implementation, testing, documentation, support, and maintenance • Collects and analyzes data for gauge and product evaluation • Establishing quality plans for equipment and processes for general and specific product performance needs • Assisting Manufacturing, Sourcing and Development in the interpretation and application of regulations • Develops and implements corrective/preventative action (CAPA) plans QUALIFICATIONS: • B.S. in engineering or an alternative Bachelor’s degree program with certification as a quality engineer (e.g. CQE) • Three (3) years experience in a Quality Engineering role • Expert knowledge of blueprint reading and geometric dimensioning and tolerance (GD&T), understanding of QSR/ISO regulations, design assurance, FMEA, and product testing methods, and are able to use optical comparators and CMMs • Knowledge of statistics, process control, and process capability If you are interested in this Quality Senior Engineer job in Warsaw, IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Suzanne Spellman at suzanne.spellman@adeccona.com or 317-558-8870. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Warsaw, IN

Quality Engineer (POST ONLY)

Quality Engineer jobs in Warsaw, IN are available courtesy of Adecco Engineering and Technology. As a Quality Engineer, you will be responsible for assuring products conform to established requirements and standards through appropriate audit, inspection, and test activities. You will identify critical personnel, gauges, procedures, and materials needed for the completion of new products. Quality Engineer job responsibilities include: • Collects and analyzes data for gauge and product evaluation • Ensures that suppliers have necessary information and facilities to deliver quality products • Formulates procedures, specifications, and standards for Zimmer products and processes QUALIFICATIONS: • B.S. in engineering or an alternative Bachelor’s degree program with certification as a quality engineer (e.g. CQE) • Three (3) years experience in a Quality Engineering role • Experience in Process Validation - IQ, OQ, PQ and Machining (CNC) Validation • Experience in Test Method Validation / GR&R • Candidate with software validation experience a plus If you are interested in this Quality Engineer job in Warsaw, IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Suzanne Spellman at suzanne.spellman@adeccona.com or 317-558-8870. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Warsaw, IN

Sr. Packaging Engineer (2428-1 & 2416-1 / Kenyon)

A Packaging Engineer job in Warsaw, IN is available courtesy of Adecco Engineering and Technology. Must have at least two years packaging experience. Must be able to work cross functionally with marketing, regulatory, etc. Must have experience in a regulated industry. Packaging Engineer job responsibilities include: • Ensuring project deadlines are met • Interfacing with Product Development, Regulatory Affairs, Marketing, Quality, outside vendors and hospital personnel • Generating and issuing required product labeling, package inserts and package graphics • Knowing and understanding FDA regulations QUALIFICATIONS: • Bachelor of Science in:

*Packaging Engineering

*Mechanical Engineering

• At least two years of packaging engineering experience • FDA experience is a preferred • A combination of internships and experience may be considered If you are interested in this Packaging Engineer job in Warsaw, IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Joshua A. Hughes at 317.558.1044 or Joshua.Hughes@AdeccoNA.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Warsaw, IN

Sr. Packaging Engineer (Post Only)

A Packaging Engineer job in Warsaw, IN is available courtesy of Adecco Engineering and Technology. Must have at least two years packaging experience. Must be able to work cross functionally with marketing, regulatory, etc. Must have experience in a regulated industry. Packaging Engineer job responsibilities include: • Ensuring project deadlines are met • Interfacing with Product Development, Regulatory Affairs, Marketing, Quality, outside vendors and hospital personnel • Generating and issuing required product labeling, package inserts and package graphics • Knowing and understanding FDA regulations QUALIFICATIONS: • Bachelor of Science in:

*Packaging Engineering

*Mechanical Engineering

• At least two years of packaging engineering experience • FDA experience is a preferred • A combination of internships and experience may be considered If you are interested in this Packaging Engineer job in Warsaw, IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Joshua A. Hughes at 317.558.1044 or Joshua.Hughes@AdeccoNA.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Warsaw, IN

Industrial Engineer

A Industrial Engineer job in Koppel, PA is available courtesy of Adecco Engineering and Technical. You must have at least one year in an industrial, manufacturing setting to be considered for this position. This role will focus on analyzing manufacturing yield performance within manufacturing operations. Industrial Engineer job responsibilities include: • Analyze data and monthly reporting for assigned plants. • Identify process improvement opportunities and establish repeatable processes and standardization. • Focus on improvements and best practices that will positively impact plant stability and operating efficiencies leading to increased income from operations. • Apply quantitative techniques and systems to drive yield optimization and increase operational efficiencies. QUALIFICATIONS: • Bachelor's Degree in Industrial Engineering • At least one year hands on experience. • Sharp/ effective communicator. • Knowledge of ERP systems. If you are interested in this Industrial Engineer job in Koppel, PA then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Gina.Butera@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Koppel, PA

HVAC TECHNICIAN


DIRECT HIRE - WASHINGTON DC

COMMERCIAL (RESTAURANT WORK) HVAC SERVICE TECH - NOVA/DC/MD $20-22 p/hr (COMPANY TRUCK INCLUDED AND CAN BE TAKEN HOME).

Preferred decent background and driving record. Strong long tenure and hard worker with lots of initiative and excellent customer service skills required. THIS ROLE HAS THE OPPORTUNITY TO BE AN OPERATIONS LEAD TECHNICIAN IN 60 DAYS SUPERVISING A CREW OF 3.


. Service, repair, and PM all types of commercial restaurant refigeration and HVAC equipment. This would include package heating and A/C units, split systems,REFRIGERATION, ovens, pumps, chillers, cooling towers, vavs, fan coils etc. Assist Junior mechanics with problems in the field.
. Heavy customer and client exposure, travel to various client sites required.
. Service, repair and PM all types of REFRIGERATION AND HVAC equipment.
. Measure airflow from air conditioning units, exhaust fans and make up air units, making sure the airflow are within design.
. Repair rooftop commercial A/C units; rooftop split systems; central A/C systems; electrical and gas fired heaters; air handlers; electrical, pneumatic and pressure controls; compressors; water-cooled and air-cooled condensers; system and equipment controls. Record readings from meters and gauges.
. Interface with customers and explain reports, punch list items and any other issues that might have arisen during the course of inspection. Resolve any issues the customer may have.
. Hard worker, team player, flexible; polite; personality desired. Professional appearance, pride in profession and a desire to have accountability and maintain ownership of tasks desired.



df-dc

Washington, DC

Mechanical Technician

Rail Car Technician

A Rail Car Technician performs work efficiently in at least two (2) of the four assignment areas identified below. Rail Car Technicians must be multi-crafted in order to perform basic work assignments in any of the four assignment areas identified below. Mechanical: Performs metal finishing efficiently and properly. Efficiently sets up all work on a rail car from drawings, procedures, and written and verbal instructions. Makes production aids such as templates and hand jigs to assist work. In addition, performs acceptable repairs on any material. Builds jigs, fixtures, and other production time--saving devices from drawings. Uses hand and power (electrical and pneumatic) tools, efficiently. Electrical: Efficiently assembles wire harnesses and terminates wire ends. From drawings can efficiently route cable or wire in complex areas such as cabs, electric lockers, or train line boxes. Has a working knowledge of electrical schematics and can troubleshoot miswires. Performs soldering to make wire connections. Machine Operation: From drawings or instructions performs all aspects of machine work from layout to finished parts, including acceptable repairs. Efficiently sets up and operates all machinery and tooling in metal fabrication shop. Brazing/Welding: Performs mock-ups of all pipe, tube, or conduit from piping schematics in a rail car and performs repairs on it. Makes jigs for spot welding aids such as templates, clamping fixtures, etc. Does troubleshooting of spot welding problems. Efficiently brazes copper-to-copper or dissimilar metals. From drawings, procedures, or mock-ups, can bend pipe, tube, or conduit. Is capable of setting up a welder to perform proper welds. Efficiently assembles and installs pipe, tube, or conduit on rail cars from drawings. Efficiently cuts, deburrs, and threads pipe, tube, or conduit. Operates spot welding machine efficiently with minimal supervision. Job Specifications: Must have at minimum three (3) years work experience in a mechanical field. Must know how to use safely and correctly hand and power tools. Must be able to read, write, and speak English. Must be able to interpret drawings/blueprints. Must be proficient in English measurement system and be able to learn the Metric measurement system within a specified period of time. Must be capable of working in an active manufacturing environment, be able to climb stairs and ladders, and be able to lift, push, or pull at maximum 40 pounds.

If you are interested in this Technician job opportunity then please click APPLY NOW.

For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com.

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Rockville, MD

Electromechanical Technician

Function Test Technician Description: Performs all aspects of work on rail cars being processed through Facility and Commissioning Sites. This includes all electrical and mechanical trouble-shooting, repairs, modifications and any other duties requested by their supervisor. The position entails working on rail cars in the final assembly process. The technician will use standard hand tools (wrenches, screwdrivers, sockets, etc.) along with his or her ability to perform basic trouble-shooting utilizing multi-meters and PC based test equipment. The technician will read piping diagrams, mechanical drawings, technical manuals and electrical schematics as required to accomplish the job assignment. The technician will perform test procedures on some the following systems: HVAC, Brakes, Propulsion, Communications systems, Toilet systems, Trainline systems, Sign systems, Automatic train control systems, general functional tests, Hipotential tests, Wining Continuity Tests, Pneumatic Leakage Tests, Dynamic Tests, Burn-in tests, etc. From time to time the Test technician will be required to assist and support the engineering group on various engineering tests. The test technician will interact directly with the customer on a regular basis and must have to ability to communicate clearly the intent and be confident in his or her assignment. The test technician will fill out all test documentation, reports and any other documentation required for the particular job assigned. Job Specification: Must have, at a minimum, the following:

*Previous work experience in the electrical or mechanical testing field.

*High school diploma or equivalent, technical school or associates in the engineering field preferred.

*Must be able to read, write and speak English.

*Ability to read and understand electrical schematics.

*Ability to read and understand blue-prints and mechanical drawings

*Proficiency with all basic hand tools

*Ability to use a multi-meter

*Must be proficient with the English measurement system and be able to learn the Metric measurement system within a specified amount of time.

*Capable of working under pressure with specific deadlines

*Able to work flexible hours, any shift,

*Ability to climb stairs and ladders, and able to lift, push, or pull a maximum of 40 lbs.

*Comfortable working in a rail yard environment.

*Willing to travel on business trips or field assignments.

*Familiar with MS office applications.

If you are interested in this Technician job opportunity then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com.

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Rockville, MD

Quality Engineer



A Quality Engineer job in Cleveland, OH is available through Adecco Engineering and Technical. To be considered for this role, you will have a minimum of two years within Quality in a manufacturing environment. You will act as the customer contact for quality concerns as well as drive quality improvement. This is a direct hire full-time opportunity with a multi-national company, the world’s leading converter of film materials. Quality Engineer job responsibilities include: • Develop, implement, and improve quality plans, programs, procedures, and systems using statistical analyses, lean manufacturing concepts, and six sigma tools and analyses. • Investigates problems and develops disposition and corrective actions for recurring discrepancies. Recommends corrective actions, dispositions and modifications. • Interact with the customer via email or telephone to collect data relating to quality issues. • Develop and implement program quality plans, programs, and procedures using statistical quality control statistics, lean manufacturing concepts, and ELS tools and analyses. Lead and/or participate in quality process improvement projects. • Responsible for claim entry process from initial entry to credit generation, corrective action letter follow-up, and samples to a fault location. Follow established process for handling customer deductions forwarded by accounts receivable. • Perform material testing and diagnosis/recommendations for purchased products exhibiting either poor quality or poor performing characteristics. • Facilitate the CAR process with the process owner. QUALIFICATIONS: • Bachelor degree or equivalent. • Two plus years in Quality within the automotive industry. • Demonstrated experience in developing and/or updating control plans and FMEA’s. • Knowledge in Lean Manufacturing, Corrective Actions, Six Sigma, or statistical analysis is a plus. • Strong technical aptitude, with attention to detail and organizational skills. • Excellent communication and computer skills. If you are interested in this Quality Engineer job opportunity in Cleveland, OH then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Kathy Becher at 216-328-5249 or Kathy.becher@adeccona.com.

Strongsville, OH

Product Development Engineer

A Product Development Engineer job in Strongsville, OH is available through Adecco Engineering and Technical. To be considered for this role, you will have a minimum of three years in Product Development Engineering. You will plan and implement a variety of projects related to product development within the consumer packaging, healthcare, and automotive industries. This is a direct hire full-time opportunity with a multi-national company, the world’s leading converter of film materials. Product Development Engineer job responsibilities include: • Develop and launch new products or process from creation through launch • Manage product development activity to meet project deadlines, including bench top and pilot plant development, experimental design test work, evaluating results, and maintenance of records • Build cross-functional relationships with manufacturing, marketing, quality, suppliers, and customers to commercialize new product initiatives, line extensions, quality improvements, and cost savings initiatives • Proactively communicate with stakeholders and demonstrate problem-solving • Plan, organize, and conduct plant trials and trials at customer locations • Develop technical solutions to a wide range of product and processing challenges as well as recommend process and material improvements QUALIFICATIONS: • Bachelor degree in Engineering or related field • 3+ years in Engineering within product development or converting technologies • Industry experience in printing or automotive is a plus • Understanding of pilot plant development, consumer testing, factory scale-up, manufacturing plant start-up and production, and commercialization • Experience in Flow/FMEA/Control Plans, DOE’s, statistical analysis, and experimental design • Ability to work with suppliers to develop reliable and repeatable components • Analytical and problem-solving skills, strong initiative, ability to manage multiple projects, prioritize, and meet deadlines If you are interested in this Product Development Engineer job opportunity in Strongsville, OH then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Kathy Becher at 216-328-5249 or Kathy.becher@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Strongsville, OH

Project Support Coordinator Job in Frederick, MD

Adecco Engineering & Technology is recruiting for a Project Support Coordinator Job in Frederick, MD. You will be supporting the New Product Introduction team in the manufacturing department. The primary focus will be creation and maintenance of production documentation and SKU creation with the client’s Product Data Management system. Project Support Coordinator Job Responsibilities:

*

*Maintains skus within Agile PC & E1 software including creation of new skus, corrections to existing skus, data cleanup, report generation and other Agile related duties as assigned.

*Creates label specifications for new products and corrections to specification of existing products.

*Work with Operation to change or add new BOM, Bill of material or create part numbers for new NPI.

*Initiate ECO (Engineering change over for newly created part numbers and timely BOM creation into E1 / ERP system.

*Collaborate with NPI Project Manager to ensure that timelines and deliverables are met for the projects as they transfer.

*Conduct required Agile and E1 activities related to establishing and releasing a sku for sale to ensure that all deliverables are met in order for the products to be released on schedule

Qualifications:

*

*Ability to work in a reasonably autonomous fashion, within a matrix environment, supporting operations

*Excellent time management skills and ability to work independently as required.

*Excellent organizational skills, including the ability to efficiently evaluate, prioritize and handle multiple and changing projects and priorities.

*Strong collaborative and team-oriented approach

*Attention to detail

*Problem-solving skills

*Strong communication skills (both verbal and written)

*Ability to multi-task in support of a diverse and complex set of needs

*Knowledge and understanding of cGMP and ISO guidelines in a laboratory environment

*Basic computer skills including word processing and spreadsheet applications.

Please APPLY NOW and send your resume in word format to Kenneth.Butterman@adeccona.com

Frederick, MD

Industrial Maintenance Technician

Adecco Direct Placement is currently recruiting candidates for an Industrial Maintenance Job in Butler, PA for our manufacturing client. We are seeking candidates with at least two years experience as an Electrician in an Industrial or Manufacturing Plant. This position has a pay rate between $16 to $20 per hour based on experience with an excellent benefits package.


Responsibilities for the Industrial Mainetance Job in Butler, PA are:
- Troubleshooting mechanical components,
- Installing, maintaining, and repairing electrical systems such as: switch gears, motor controls, electrical panels, CT cabinets, conveyor systems, lighting, and power supplies
- troublshooting and preventative maintenance
- Inspecting systems, equipment, or components; - Diagnosing malfunctioning systems, apparatus, or components

Qualifications for this position are:
- Two (2) years of experience as an industrial maintenance tech.- Ability to follow electrical code manuals to install and repair electrical systems
- Understand schematic diagrams, blueprints and other specifications required by our client
- Own basic tools including wrenches, measuring tools, etc.
- Strong working knowledge of job site safety as well as ability to complete a company specific safety orientation



If you meet the above qualifications and would like to apply for this position, please click APPLY NOW and upload your resume. For additional information, please e-mail or call our recruiter, Madeleine Felion at 814-844-6976 OR madeleine.felion@adeccona.com. EOEdf-dc

Butler, PA

Direct-Hire Electrical Engineer

Adecco Engineering and Technical is currently recruiting for a direct-hire Electrical Engineer job located in Butler, PA. You must have five years' experience in the design and integration of control systems. In this role, you will be responsible for the design and integration of control systems that utilize an FPGA, DSP, microcontroller, PLC or embedded computer as the main controller. You will also assist with the design of digital circuit boards. Electrical Engineer job responsibilities include: - Design and integration of control systems that utilize an FPGA, DSP, microcontroller, PLC or embedded computer as the main controller. - Assist with the design of digital circuit boards. - Implement FPGA designs using VHDL - Perform engineering support of existing products - Create and update documentation packages as required. Qualifications: - Bachelor’s Degree in Electrical Engineering OR Master’s Degree - Five years experience in a hands on electrical engineering role preferred; will consider entry level candidates with a MSEE degree. - Coursework or experience with VHDL and programmable devices - Coursework or experience with analog and digital circuit design - Coursework or experience with microprocessor, microcontroller or DSP - Coursework or experience with embedded system design If you are interested in this direct-hire Electrical Engineer job opportunity in Butler, PA then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com.

Butler, PA

Technical Services Engineer

Adecco Engineering and Technology is currently recruiting for a direct hire Technical Services Engineer job located in Walbridge, OH. In this role, you will be responsible for application engineering duties, including process and product development and interfacing with customers. You will need to have a Bachelors Degree in Metallurgy or Materials Science. Technical Services Engineer responsibilities include:

*Interacting with customers at their facilities to determine product capabilities

*Convey customer specs to internal sales team for contract negotiations

*Work with product and process development teams to manufacture product to customers’ needs; including developing process routings

*Participate in APQP process and monitor quality during production to maintain customer specs - act as a Quality Auditor when needed

*Monitor EMT and UL standards

*Provide technical support to customers when required

QUALIFICATIONS:

*Bachelor’s degree in Metallurgy or Materials Science

*Co-op or internship experience in Engineering field - Quality, Manufacturing, etc.

*Knowledge of Steel material

*ASTM knowledge is preferred

*Familiarity of mill or fabrication environment a plus

*Problem Solver, creative, professional, great communication and customer service skills

*Ability to travel regionally

If you are interested in this Technical Services Engineer job opportunity in Walbridge, OH then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please contact Danielle Wehner at danielle.wehner@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

walbridge, OH

Electronics Tech

A contract to hire Electronics Technician job in Aurora, OH is available through Adecco Engineering and Technical. In this role, you will complete lays out, builds, tests, troubleshoots, and services, with repairs, MR coils and their components, parts or related equipment or systems. The pay is $17/hr. Electronics Technician job responsibilities to include:

*Reads work procedures and schematics, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed

*Positions and aligns parts in specified relationship to each other in coils, connectors, assemblies, fixtures or other holding devices.

*May participate in quality control inspections of certain subassemblies and final product.

*Assembling, testing and troubleshooting electronic components, subassemblies and coils.

*Assists in the training of other production associates and electronic technicians.

*Communicates process improvement and procedure errors to Group Leader.

*Designs and builds test fixtures while performing verification and validation tests.

Qualifications:

*Associates Degree in Electronics or equivalent

*Two years of work experience (outside of school) in electronic assembly, soldering, tuning, and testing. Demonstrated knowledge in the use of hand and electric tools. Proficiency with basic electrical instrumentation.

*Demonstrated ability to communicate with leadership and co-workers.

*The ability to lift up to 30 lbs and the ability to stand, sit, reach and bend. Ability to follow all safety and quality policies and procedures. Familiarity with basic electrical instrumentation.

*Medical Device or RF is a plus.

If you are interested in this Electronics Technician job in Aurora, OH then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Danielle Wehner at danielle.wehner@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Aurora, OH

Lab Technician

A Manufacturing Lab Technician job in Cleveland, OH is available through Adecco Engineering and Technical. To be considered for this role, you will have experience in a manufacturing or industrial environment, with lab testing experience being a plus. You will have a chance to work with a global paints and coatings manufacturing company on the near west side of Cleveland, Ohio. This company is a global supplier of paints, coatings, optical products, specialty materials, glass and fiber glass. This is a one year contract role with potential to go full-time direct. There are several positions available on 1st, 2nd, and 3rd shifts and the pay rate is $12.55 per hour. Technician job responsibilities include: • Paint mixing, spraying, and a various physical and chemical testing • Data input and analysis • Hand spraying of panels QUALIFICATIONS: • Manufacturing or industrial experience, such as mixing or batching • Paints or coatings background is a plus • Strong mathematical skills • General chemistry knowledge • Lab experience is a plus • Excellent work history including strong attendance record

If you are interested, please give me a call at your convenience at 216-750-6233 to discuss this opportunity, or let me know a good time in which I can reach you. If you are seeking employment but not interested in this role, please give me a call and we can talk about your career goals and possibly locate a better match. You can email me at Ashley.Gadowski@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Cleveland, OH

Technical Editor

Technical Editor 3 Month Contract W-2 Hourly Contract Only Laurel, MD This position starts Oct 2014 for a short term project Job Description:

To provide project management and technical editing of NASA proposals. Responsibilities:

*Manage projects including publications, presentations, and proposal production processes. Coordinate and lead teams assigned to individual tasks. Develop plans to accomplish work in deadline-driven environment.

*Edit documents (publications, presentations, and proposals) online and in hard copy form as necessary, using standard proofreading markup. Ensure adherence to prescribed style and formatting. Write/rewrite sections of documents and organize content. Reduce text. Query authors for clarifications. Interface with clients, electronic publishers, graphic artists, and printing staff.

*Use MS Word and Adobe In-Design to compose documents.

*Complete required production paperwork and job tracking information related to tasks.

Basic Qualifications Required:

*Bachelor's degree or equivalent in Journalism, English, or in a relevant technical/scientific field with a minimum of 8 years of editorial work experience in a technical/scientific environment.

*Major concentration on scientific publications and technical writing (preferably Aerospace industry).

*Accurate copy editing skills and use of standard proofreading markup with experience in mathematical expressions.

*Must effectively team with all levels of staff and meet strict production deadlines.

*Must possess strong written and oral communication skills as well as effective customer service skills.

*Ability to effectively manage multiple projects simultaneously.

*Functions well on PC and/or Mac computer platforms.

*Proficient with Microsoft Office, Adobe InDesign, and Adobe Acrobat.

*Overtime is required.

Laurel, MD

Supplier Quality Engineer

A Supplier Quality Engineer job in Grove City, PA is available courtesy of Adecco Engineering and Technical. You must have experience in Quality Engineering to be considered for this position. This position is responsible for defined work or projects with moderate complexity. Supplier Quality Engineer job responsibilities include: • Provide leadership to drive growth in business cooperation between company and supplier base. • Act as the technical focal point for supplier activities directed toward process control and quality assurance of business components. • Assist in the supplier approval process including manufacturing, technology, and EH&S risk analysis. • Drive continuous improvement of supplier's quality, cycle and delivery performance through Six Sigma. QUALIFICATIONS: • Bachelor's Degree (or high school diploma with at least five years of experience in a Sourcing Quality role). • At least three years hands on experience. • Willingness and ability to travel as necessary (10% to 15% of the time in the U.S.). • Prior experience in interpretation of blueprints/specifications, metrology, and manufacturing process planning/evaluation. If you are interested in this Supplier Quality Engineer job in Grove City then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technical go to www.adeccousa.com. If you have questions about the position please contact Gina Butera at Gina.Butera@adeccona.com. Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Grove City, PA

CAD Designer Job Linthicum, MD - Long Term Contract

CAD Designer- Linthicum, MD We are recruiting on a long term contract role for CAD Designer job in Linthicum, MD. he selected candidate will perform basic design along with full CAD support for projects. The CAD Designer will work with various Programmers, Designers and Engineers to develop base geometry and most efficient processes for design automation. This is Directly From the Hiring Manager as to what they are lookig for.

*Motivated to learn

*AutoCAD and Inventor Experience

*Decent Communication Skills

*Ability to work and function on a team

Responsibilities:

*Create a series of CAD models and drawings (AutoCAD 2D, Inventor 3D) which will be used as the basis for design automation tools. The drawings and models will integrate with .NET and C Programming interfaces through use of CAD command toolbars and software API..

*Guide and track projects in the design phase. Ensure all project data is current and communicated to all team members on a regular basis. Assist with all projects, at all stages, as necessary.

*Maintain engineering standards and procedures.

*Assists with the development and management of CAD standards

*Carries a project load in a CAD Technician role

*Work as an integral member of a Sales Team to provide drafting, sales/technical support to customers and serve as a liaison with precasters to meet specific drawing needs.

*Plan and create models for new or modified systems.

*Utilize information from site plans and engineering specifications to develop drawings.

*Routine drafting projects, such as the preparation of various drawings of products derived from layouts and sketches.

*Utilize applications such as AutoCAD, Inventor and Excel on a daily basis in completing drawings to meet project deadlines.

*Maintain and improve models for production of drawings through automated means.

*Model and mentor less experienced CAD technicians.

*Assists in training and development of new CAD staff.

*Take initiative and act as a resource for special projects and other departments.

*Understand territory service strategy and drive results accordingly.

*Other duties as assigned.

Requirements

*Excellent understanding of Autodesk Inventor required -

*Experience using AutoCAD required

*Strong Math Skills. The Developer will:

*Use Equations as parameters in Inventor required

*Use Inventor with geometric constraints

*Set up Inventor templates (i.e. base models, assemblies, drawings, etc).

*Set up AutoCAD drawing templates

*Experience using Blocks and XRef's

*Experience using Dynamic Blocks is a plus

*Experience customizing AutoCAD and/or Inventor a plus

*Experience interfacing custom programs to CAD a plus

Please APPLY NOW and send any questions to christopher.wilkins@adeccona.com

Linthicum Heights, MD

Mechanical Instructor

Adecco is currently assisting a local company in Westminister, MD in their search for an experienced Mechanical Instructor. This is a contracted position, lasting until February 2015.

Candidate must meet the following qualifications:

- 7 years expereince with Technical writing and instructing for mechanical, electronic, pneumatic and hydraulic systems
- Must have 3-5 years experience developing structured training materials and teaching technical sessions.
-Experience with railcar brake and HVAC systems preferred.

This is a First Shift position, working Monday - Thursday 9am-4pm. Pay will depend on expereince.

To be considered for the position, please visit adeccousa.com, use office code 1087 and click the "apply now" button to submit your resume.

For more opportunities, view other jobs posted at Adeccousa.com

Equal Opportunity Employer Minorities/Women/Veterans/Disableddf-dc

Westminster, MD

Sr. Electrical Engineer

Adecco E&T is working a Sr. Electrical Engineer Job in Baltimore, MD. You will design equipment and systems while also preparing construction drawings and specifications. You must have your PE and 9-15 years of EE experience. Sr. Electrical Engineer Job in Baltimore, MD Responsibilities:

*Designs and selects equipment and systems

*Prepares construction drawings and specifications

*Performs electrical engineering calculations, including short circuit, load analysis, system coordination, energy calculations

*Directs and mentors junior designers and graduate engineers

*Negotiates critical and controversial issues with appropriate parties

*Prepares fee proposals

*Responsible for financial management of all assigned projects

*Responsible for quality control on assigned projects

Qualifications:

*Bachelor of Science in Electrical Engineering

*9-15 years of Electrical Engineering experience

*Professional Registration (P.E.) required

*Expert knowledge of NEC and building codes

*Ability to prioritize and concurrently service multiple projects

*Maintains effective communication with project team members

*Interacts well with other disciplines and clients in a manner that builds productive relationships

*Experience with AutoCAD and Revit

*LEED accreditation required

If you are interested in the Sr. Electrical Engineer job in Baltimore, MD please APPLY NOW and also send your resume in word format to Christopher.Wilkins@adeccona.com

Baltimore, MD

What Adecco Provides

Adecco provides free temporary, contract and direct-hire staffing services to job seekers, but we go further than the typical staffing agency. We go beyond just providing you with a job placement; we equip you with the resources required to succeed in the educational field — resources like interview training, resume enhancement, career consultation and more. Trust Adecco – apply online or create an account now.

© 2014 Adecco. All rights reserved.
Privacy PolicyTerm of useSitemap